ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/Split |
|---|
| Front |
| Camber (All vehicles except Gasoline Turbocharged Direct Injection (GTDI)) | 0.4° ± 0.75° | 0.4° ± 0.75° | 0° ± 0.75° (1) |
| Camber ( GTDI vehicles) | 0.5° ± 0.75° | 0.4° ± 0.75° | 0° ± 0.75° (2) |
| Caster | 3.1° ± 0.50° | 3.1° ± 0.50° | 0° ± 0.70° (2) |
| Toe (positive value is toe in, negative value is toe out) | | | +0.10° ± 0.20° |
| Rear |
| Camber (All vehicles except GTDI ) | 0.80° ± 0.75° | 0.80° ± 0.75° | |
| Camber ( GTDI vehicles) | 1.00° ± 0.75° | 1.00° ± 0.75° | |
| Toe (positive value is toe in, negative value is toe out), All Vehicles | 0.12° ± 0.20° | 0.12° ± 0.20° | 0.24° ± 0.20° |
| Thrust Angle | | | 0.0° ± 0.30° |
| (1) Camber Total/Split = LH Camber - RH Camber (2) Caster Total/Split = LH Caster - RH Caster |
| (1) | Camber Total/Split = LH Camber - RH Camber |
| (2) | Caster Total/Split = LH Caster - RH Caster |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|
| Ride Height |
| Front | 52 mm (2.05 in) ± 10 mm (0.39 in) |
| Rear | 26 mm (1.02 in) ± 10 mm (0.39 in) |
TORQUE SPECIFICATIONS
| Description | Nm |
|---|
| Strut upper mount nuts | 35 |
| Tie-rod jam nuts, front | 63 |
| Tie-rod jam nuts, rear | 80 |
| Upper arm-to-wheel knuckle nut | 200 |
Scheme 1
Scheme 1: Negative and Positive Camber
Camber is the vertical tilt of the wheel when viewed from the front. Camber can be positive or negative and has a direct effect on tire wear.
