Home/Ford/Flex/Ford Flex I (2008-2013)/Repair manual/Automatic Trans/Automatic Transmission Cooler - Transaxle/transmission Cool…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Cooler - Transaxle/transmission Cooling: Specifications Ford Flex I

MATERIAL SPECIFICATIONS

ItemSpecificationFill Capacity
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVMERCON® LV8.9L (9.4 qt)

MATERIAL SPECIFICATIONS

GENERAL SPECIFICATIONS

ItemSpecification
Transmission Fluid
The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the material specification for the correct fluid.
NOTE: Do not use water-based cleaners to clean or flush the transmission fluid cooler tubes or transmission damage will occur. Mineral spirits can be used to clean the transmission fluid cooler tubes, providing the transmission fluid cooler tubes are flushed with clean transmission fluid and blown dry with shop air. Use only clean transmission fluid designated for this transaxle and torque converter being serviced.
NOTE
Do not use water-based cleaners to clean or flush the transmission fluid cooler tubes or transmission damage will occur. Mineral spirits can be used to clean the transmission fluid cooler tubes, providing the transmission fluid cooler tubes are flushed with clean transmission fluid and blown dry with shop air. Use only clean transmission fluid designated for this transaxle and torque converter being serviced.

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Transmission fluid cooler thermal bypass valve nuts9
Transmission fluid cooler tube bolts9
Transmission fluid cooler tube fittings30
Transmission fluid cooler tube retainer bolt9

TORQUE SPECIFICATIONS