Contents Wiring diagrams Section: Starter All sections

Starting System: Specifications Ford Fiesta Mk6

Starter ~152 words

Torque Specifications

DescriptionN.mLb. ft.Lb. in.
Starter motor bolts4835
Starter motor solenoid battery cable nut1089
Starter motor solenoid wire nut1089

TORQUE REFERENCE CHART

The starting system consists of the following

Without Intelligent Access

  1. Battery
  2. Battery cables
  3. Ignition switch
  4. Starter motor
  5. Starter relay (located in the Battery Junction Box (BJB)
  6. PCM (located in the engine compartment attached to the battery tray)
  7. Transmission Range (TR) sensor (automatic transaxle-equipped vehicles) (located on the transaxle)
  8. Clutch Pedal Position (CPP) switch (manual transmission-equipped vehicles) (located on the clutch pedal)
  9. Transmission Control Module (TCM) (located on the transaxle)
  10. Integrated Keyhead Transmitters (IKTs)

With Intelligent Access

  1. Battery
  2. Battery cables
  3. Start/stop switch
  4. Starter motor
  5. Starter relay (located in the BJB
  6. PCM (located in the engine compartment attached to the battery tray)
  7. Brake pedal switch (automatic transaxle)
  8. TR sensor (automatic transaxle-equipped vehicles) (located on the transaxle)
  9. CPP switch (manual transmission-equipped vehicles) (located on the clutch pedal)
  10. TCM (located on the transaxle)
  11. Intelligent Access (IA) key
  12. Remote Function Actuator (RFA) module

See also:
JACKING AND LIFTING