Home/Ford/Explorer/Ford Explorer III (2001-2006)/Repair manual/Removal & Installation/Engine Controls - Removal & Installation: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal & Installation: Specifications Ford Explorer III

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Cylinder Head Temperature Sensor (4.6L)19 (26)
EGR Valve Bolt15 (20)
EGR Valve Tube Nut
4.0L25 (34)
4.6L30 (40)
Engine Coolant Temperature Sensor15 (20)
EVAP Canister Purge Valve Bracket Bolt18 (25)
Fuel Pump Module Lock Ring66 (90)
Fuel Supply Manifold Bolt (4.0L)17 (23)
Fuel Tank Skid Plate Bolt30 (40)
Fuel Tank Strap Bolt41 (55)
Heated Oxygen Sensor30 (40)
Intake Manifold Bolts (4.6L)18 (25)
Knock Sensor18 (25)
Spark Plug
4.0L15 (20)
4.6L13 (18)
Thermostat Housing Bolt (4.6L)18 (25)
INCH Lbs. (N.m)
Camshaft Position Sensor Bolt
4.0L71 (8)
4.6L89 (10)
Crankshaft Position Sensor Bolt89 (10)
EVAP Canister Nut89 (10)
Fuel Pressure Relief Valve Bolt53 (6)
Fuel Pulse Damper Bolt53 (6)
Fuel Supply Manifold Bolt (4.6L)89 (10)
Generator Upper Bracket Bolt (4.6L)89 (10)
Idle Air Control Bolt89 (10)
Ignition Coil (4.6L)53 (6)
Ignition Coil Bolts (4.0L)53 (6)
Ignition Coil Bracket Bolt (4.0L)89 (10)
Inertia Fuel Shutoff Switch Bolts18 (2)
Intake Manifold Bolts (4.0L)89 (10)
Mass Airflow Sensor89 (10)
Powertrain Control Module Bracket Bolts71 (8)
Powertrain Control Module Connector Bolt62 (7)
Schrader Valve Cap4-6 (.5-.7)
Thermostat Housing Bolt (4.0L)89 (10)
Throttle Body-To-Adapter Bolt (4.6L)
Step 180 (9)
Step 2(1)
Throttle Body Adapter-To-Manifold Bolt (4.6L)89 (10)
Throttle Body-To-Manifold Bolt (4.0L)80 (9)
Throttle Position Sensor Screws
4.0L11-16 (1.2-1.8)
4.6L27 (3.1)
(1) Turn an additional 90 degrees.
(1)Turn an additional 90 degrees.

TORQUE SPECIFICATIONS

See also:
DRIVE CYCLES