Home/Ford/Escape/Ford Escape III (2012-2015)/Repair manual/Removal & Installation/Acceleration Control System: Other

Contents

Wiring diagrams Section: Removal & Installation

All sections

Acceleration Control System: Other Ford Escape III

Removal & Installation 1 illustration

Accelerator Pedal

Note. Removal steps in this procedure may contain installation steps.

Note. To prevent setting Diagnostic Trouble Codes DTC make sure the ignition is in the OFF position prior to disconnecting the accelerator pedal electrical connector.

Scheme 1

Scheme 1: Accelerator Pedal

Scheme 1: Accelerator Pedal

Tighten to 8 Nm (71 lb-In).
To install, reverse the removal procedure.