Home ReviewsRefund
Home/Ford/Escape/Ford Escape III (2012-2015)/Repair manual/Automatic Trans/Automatic Transaxle External Control - 6F35: Removal & Inst…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transaxle External Control - 6F35: Removal & Installation Ford Escape III

Automatic Trans 2 illustrations ~328 words

Removal

All Vehicles

Pinpoint Test D

D6 FWD Vehicles
  1. click to open the image
  2. FWD Vehicles
D9 AWD Vehicles
  1. click to open the image
  2. AWD Vehicles
D13 All Vehicles
  1. click to open the image
  2. All Vehicles

Installation

All Vehicles

Pinpoint Test D

D6 AWD Vehicles
  1. click to open the image
  2. AWD Vehicles
D8 FWD Vehicles
  1. FWD Vehicles
D9 All Vehicles
  1. click to open the image
  2. All Vehicles
D16 AWD Vehicles
  1. click to open the image
  2. AWD Vehicles
D17 FWD Vehicles
  1. FWD Vehicles
D18 All Vehicles
  1. All Vehicles

Scheme 1

Scheme 1: Removal And Installation
Scheme 1: Removal And Installation
  1. Remove the floor console. Refer to «INSTRUMENT PANEL AND CONSOLE»(ref-569596) .
  2. To install, tighten to 9 Nm (80 lb-in).
  3. To install, reverse the removal procedure.
  4. Adjust the selector lever cable when a new selector lever is installed. Refer to «SELECTOR LEVER CABLE ADJUSTMENT»(ref-569611-S14034235242013072700000) .

Scheme 2

Scheme 2: Removal And Installation
Scheme 2: Removal And Installation
  1. NOTE: The SelectShift® switch is part of the selector lever knob. To install a new SelectShift® switch a new selector lever knob must be installed. Fully apply the parking brake lever.
  2. NOTE: Interior trim remover.
  3. To install, reverse the removal procedure.

Removal And Installation

  1. NOTE: The SelectShift® switch is part of the selector lever knob. To install a new SelectShift® switch a new selector lever knob must be installed. Fully apply the parking brake lever.
  2. NOTE: Interior trim remover.
  3. To install, reverse the removal procedure.

More articles — Automatic Transaxle External Control - 6F35