MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | 960 ml (2 pt) |
| High Temperature Nickel Anti-Seize Lubricant XL-2 | ESE-M12A4-A | |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) | ||
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |
MATERIAL SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Front Brake Disc | |
| Brake disc minimum thickness | 24 mm (0.944 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Rear Drum Brake | |
| Brake drum maximum diameter | 256.3 mm (10.090 in) |
| Brake shoe minimum thickness | 1.0 mm (0.039 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Brake caliper bleeder screw | 16 |
| Master cylinder brake tube fittings | 25 |
| Master cylinder bleeder screw (non-hybrid vehicles) | 3 |
| Wheel cylinder bleeder screw | 5 |
TORQUE SPECIFICATIONS
The brake system has the following components
- Brake master cylinder and fluid reservoir
- Cable actuated parking brake system
- Clevis pin
- Electric vacuum pump (hybrid vehicles)
- Fixed position brake pedal (non-hybrid vehicles)
- Fixed brake pedal with integrated brake-by-wire system (hybrid vehicles)
- Four-wheel ABS
- Front disc brake system
- Rear drum brake system
- Vacuum-assisted power brake booster (non-hybrid vehicles)
- Vacuum-assisted active booster (hybrid vehicles)
See also:
• JACKING & LIFTING