GENERAL SPECIFICATIONS (6.0L DIESEL)
| Item | Specification |
|---|---|
| Normal engine cranking speed | 185 rpm |
| Starter motor no load current draw | 155 amps max. |
| Starter motor normal load current draw | 365 amps |
| Starter motor maximum load current draw | 1300 amps |
| Starter motor minimum stall torque @ 2.5 volts | 74 Nm (55 lb-ft) |
| Starting circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volts |
GENERAL SPECIFICATIONS (6.0L DIESEL)
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Solenoid B-terminal nuts | 14 |
| Starter mounting bolts | 25 |
| Battery cable nut | 12 |
| Solenoid wire nut | 6 |
| Harness bracket nut | 22 |
TORQUE SPECIFICATIONS
The starting system consists of the following components
- Starter motor
- Starter switch, part of the ignition switch
- Digital transmission range (DTR) sensor
- Starter motor relay
- Starter solenoid
- Starter drive
