Restraint System Diagnostic Tool Warning
| WARNING | This tool is for restraint system service only. Remove from vehicle prior to road use. Failure to remove could result in injury and possible violation of vehicle safety standards. |
Scheme 1
Scheme 1: Inspection and Verification
- Verify the customer concern by operating the power seat.
- Visually inspect for mechanical or electrical concerns or damage. VISUAL INSPECTION CHART
- If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
- If the concern is not visually evident, verify the symptom. GO to «SYMPTOM CHART»(ref-210207-S42034958882005121400000) .
Scheme 2
Scheme 3
Scheme 3: PINPOINT TEST A: THE POWER SEAT IS INOPERATIVE
Scheme 4
Scheme 4: PINPOINT TEST B: THE POWER SEAT MOVES BUT IS NOISY
Scheme 5
Scheme 5: PINPOINT TEST C: THE POWER SEAT MOVES BUT IS LOOSE
Scheme 6
Scheme 6: PINPOINT TEST D: THE POWER SEAT DOES NOT MAKE FULL TRAVEL
Scheme 7
Scheme 7: PINPOINT TEST E: THE POWER SEAT DOES NOT MOVE HORIZONTALLY/VERTICALLY
Scheme 8
Scheme 9
Scheme 10
Scheme 11
Scheme 12
