Home ReviewsRefund
Home/Ford/Econoline E150/Ford Econoline E150 (1997-2012)/Repair manual/Ignition Switch/steering Lock/Steering Column Switches: Removal & Installation
Contents Wiring diagrams Section: Ignition Switch/steering Lock All sections

Steering Column Switches: Removal & Installation Ford Econoline E150

Ignition Switch/steering Lock 2 illustrations ~110 words

Installation

  1. To install, reverse the removal procedure. Repower the supplemental restraint system (SRS). For additional information, refer to «AIR BAG RESTRAINT SYSTEMS»(ref-170321) .

Scheme 10

Scheme 10: Removal
Scheme 10: Removal

Scheme 11

Scheme 11
Scheme 11
  1. Depower the supplemental restraint system (SRS). For additional information, refer to «AIR BAG RESTRAINT SYSTEMS»(ref-170321) .
  2. Pull the steering column opening cover off the lower instrument panel.
  3. Disconnect the wiring harness from the ignition switch.
  4. Remove the ignition switch screws and the ignition switch.
  1. To install, reverse the removal procedure. Repower the supplemental restraint system (SRS). For additional information, refer to «AIR BAG RESTRAINT SYSTEMS»(ref-170321) .

Removal and Installation

For additional information, refer to STEERING COLUMN .

More articles — Steering Column Switches