Contents Wiring diagrams Section: Charging System All sections

Battery, Mounting and Cables: Specifications Ford Econoline E150

GENERAL SPECIFICATIONS

ItemSpecification
4.6L, 5.4L, 6.8L
Voltage12 volts
Cold cranking amps (CCA)650 CCA (625 CCA on auxiliary battery)
Amp/hr72 amp/hr (75 amp/hr on auxiliary battery)
6.0L
Voltage12 volts
Cold cranking amps (CCA)750 CCA
Amp/hr78 amp/hr

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Auxiliary battery case to frame bolts34-46
Auxiliary battery ground cable-to-frame bolt12-15
Auxiliary battery harness-to-frame clip screws12-15
Auxiliary battery relay mounting screws7-9
Auxiliary battery relay terminal nuts7-9
Auxiliary or battery hold-down wedge screw5.5-7
Auxiliary or battery safety strap bolts26-34
Auxiliary case cover bolts6-7
Auxiliary positive and negative battery terminal nuts13-17
Battery box cover bolts7
Battery junction box (BJB) cable nut8
Battery negative cable body ground screw (6.0L)30
Battery negative cable-to-frame bolt (6.0L)25
Battery positive cable bracket nut (6.0L)30
Battery tray bolts22-34
Body-to-frame ground bolt9
Primary battery cable bracket nut, 4.6L7-9
Primary battery cable bracket nut, 5.4L and 6.8L26-34
Primary battery cable ground eyelet nut7-9
Primary positive and negative battery terminal nuts6-8
Primary positive and negative battery terminal nuts13-17
Radiator support bracket bolts (6.0L)14
Starter cable hanger stud nut20
Starter motor positive terminal nut (6.0L)5
Starter motor relay B+ and enable terminal nuts7-9
Starter motor relay mounting screws7-9
Starter motor/solenoid B+ terminal nut11-13
Starter motor/solenoid enable terminal nut4-6
Starter motor/solenoid ground nut20-25
Starter motor/solenoid ground stud22-28
Starter motor/solenoid mounting bolts22-28
Starter solenoid cable nut (6.0L)3
Jump-start connection bracket bolts (6.0L)20

TORQUE SPECIFICATIONS

See also:
JACKING & LIFTING