Home ReviewsRefund
Home/Ford/Crown Victoria/Ford Crown Victoria II (1997-2011)/Repair manual/Horns/Horn System
Contents Section: Horns All sections

Horn System Ford Crown Victoria II

Horns 9 illustrations ~134 words

TORQUE SPECIFICATIONS

DescriptionNm
Horn nut20

TORQUE SPECIFICATIONS

The horn system includes the following

  1. horn relay
  2. horn
  3. clock spring
  4. steering wheel control switch harness
  5. steering wheel pad horn switch, which is part of the driver side air bag module. For additional information, refer to «AIR BAG RESTRAINT SYSTEMS»(/ford/crown-victoria/ii-1997-2011/remont/airbag/#supplemental-inflatable-restraint-system) .

The horn is located behind the front bumper mounted to the radiator support.

Refer to SYSTEM WIRING DIAGRAMS for schematic and connector information.

Scheme 1

Scheme 1: Horn
Scheme 1: Horn

Scheme 2

Scheme 2: Inspection and Verification
Scheme 2: Inspection and Verification
  1. Verify the customer concern by operating the system.
  2. Visually inspect for the following obvious signs of mechanical or electrical damage.
  3. If the fault is not visually evident, verify the symptom and refer to «SYMPTOM CHART»(/ford/crown-victoria/ii-1997-2011/remont/horns/#horn-system) .

Scheme 3

Scheme 3: Symptom Chart
Scheme 3: Symptom Chart

Scheme 4

Scheme 4: PINPOINT TEST A: THE HORN IS INOPERATIVE
Scheme 4: PINPOINT TEST A: THE HORN IS INOPERATIVE

Scheme 5

Scheme 5
Scheme 5

Scheme 6

Scheme 6
Scheme 6

Scheme 7

Scheme 7
Scheme 7

Scheme 8

Scheme 8
Scheme 8

Scheme 9

Scheme 9: PINPOINT TEST B: THE HORN IS ALWAYS ON
Scheme 9: PINPOINT TEST B: THE HORN IS ALWAYS ON