Removal
Note. Removal steps in this procedure may contain installation details.
Pinpoint Test D
D2
Exterior mirror assembly
- To remove the exterior mirror assembly carry out steps 2 through 4.
- To remove the mirror glass carry out steps 2 through 8.
- To remove the mirror motor carry out steps 9 through 10.
- To remove the mirror cover carry out steps 11 through 12.
- To remove the exterior mirror turn signal carry out steps 13 through 15.
- To remove the puddle lamp carry out steps 16 through 17.
D5
Mirror glass
- click to open the image
- Mirror glass
D9
Mirror Motor
- NOTE: If required
- click to open the image
- Mirror Motor
D11
Exterior mirror cover
- click to open the image
- Exterior mirror cover
D13
Exterior mirror turn signal
- click to open the image
- Exterior mirror turn signal
D16
Exterior mirror puddle lamp
- click to open the image
- Exterior mirror puddle lamp
Installation
- To install, reverse the removal procedure.
SPECIAL TOOL DESCRIPTION 501-025 Installer, Rear Mirror 501-D118A Mirror Remover
Scheme 1
Note. Removal steps in this procedure may contain installation details.
Pinpoint Test D
D2
Mirror type 1
- click to open the image
- Mirror type 1
D7
Mirror type 2
- click to open the image
- Mirror type 2
D8
501-D118A Mirror Remover
- click to open the image
- Mirror type 3
D11
Mirror type 4
- click to open the image
- Mirror type 4
D15
Mirror type 5
- click to open the image
- Mirror type 5
Mirror type 1
Pinpoint Test D
D4
Mirror type 2
- Mirror type 2
D5
501-025 Installer, Rear View Mirror
- click to open the image
D6
Mirror type 3
- Mirror type 3
D7
Mirror type 4
- Mirror type 4
D9
Mirror type 5
- Mirror type 5