Home/Dodge/Stratus/Dodge Stratus I (1995-2000)/Repair manual/Mechanical/2.0L 4-CYL Engine - VIN [C]: Specifications
Contents Wiring diagrams Section: Mechanical All sections

2.0L 4-CYL Engine - VIN [C]: Specifications Dodge Stratus I

Crankcase Capacity

Oil capacity is 4.5 qts. (4.25L) with filter.

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Camshaft Sprocket Bolt85 (115)
Connecting Rod Cap Bolts(1) 20 (27)
Crankshaft Damper Bolt105 (142)
Crankshaft Main Bearing Cap/Bedplate
M8 Bedplate Bolts22 (30)
M11 Main Cap Bolts60 (81)
Cylinder Head Bolts (2)
1st Step25 (34)
2nd Step50 (68)
3rd Step50 (68)
4th Step (3)Tighten additional 1/4 turn
Engine Support Bracket Bolts30 (41)
Exhaust Manifold-To-Cylinder Head Bolts17 (23)
Flex Plate-To-Crankshaft Bolts70 (95)
Front Cover Bolts16 (22)
Oil Filter15 (20)
Oil Pan Drain Plug25 (34)
Oil Pump Mounting Bolts21 (28)
Oil Pump Pick-Up Tube Screw21 (28)
Oil Pump Relief Valve Retaining Cap30 (41)
Rocker Arm Shaft21 (28)
Spark Plugs21 (28)
Tensioner Pulley Bracket Bolts23 (31)
Thermostat Housing Bolts17 (23)
Timing Belt Tensioner Bolt23 (31)
INCH Lbs. (N.m)
Camshaft Sensor Pick-up Bolts81 (10)
Exhaust Manifold Heat Shield106 (12)
Intake Manifold Bolts106 (12)
Oil Pan Bolts106 (12)
Oil Pump Cover Bolt106 (12)
Timing Belt Cover Bolts106 (12)
Valve Cover Bolt106 (12)
Water Pump-To-Engine Block106 (12)
(1) Tighten bolts to specification, then add 1/4 turn. (2) Tighten bolts to specification in sequence. (Схема №7) (3) DO NOT use a torque wrench for 4th step.
(1)Tighten bolts to specification, then add 1/4 turn.
(2)Tighten bolts to specification in sequence. (Схема №7)
(3)DO NOT use a torque wrench for 4th step.

TORQUE SPECIFICATIONS

GENERAL SPECIFICATIONS

ApplicationSpecification
Displacement122 Cu. In. (2.0L)
Bore3.445" (87.5 mm)
Stroke3.267" (83 mm)
Compression Ratio9.8:1
Fuel SystemSFI
Horsepower @ RPM(1)
Torque Ft. Lbs. @ RPM(1)
(1) Information is not available from manufacturer.
(1)Information is not available from manufacturer.

GENERAL SPECIFICATIONS