WINDOW CALIBRATION
Note. The wiTECH software level must be at the latest release to perform this procedure.
Note. Vehicles equipped with the auto up feature must have the windows calibrated after a battery disconnect.
Note. The door must be completely closed when starting this step.
- Sit in the driver seat and close the door.
- Lower the window part of the way down.
- Run the window to the full up position and continue to hold the switch for an additional two seconds.
- Run the window to the full down position and continue to hold the switch for an additional two seconds.
- Raise the window to the full up position.
- Repeat the steps for the remaining windows.