DAKOTA & DURANGO
| Application | Ft. Lbs. (N.m) |
|---|
| Front Drive Shaft Universal Joint Strap-To-Transfer Case Flange Bolt | 20 (27) |
| Rear Crossmember Bolt | 30 (41) |
| Rear Drive Shaft Center Bearing-To-Crossmember Bolt | 50 (68) |
| Rear Drive Shaft Universal Joint Strap-To-Rear Axle Flange Bolt | 14 (19) |
| Starter Bolt | 50 (68) |
| Torque Converter-To-Drive Plate Bolt | 23 (31) |
| Transfer Case-To-Transmission Bolt | 26 (35) |
| Transmission Crossmember Bolt | 50 (68) |
| Transmission-To-Engine Block Bolt | (1) |
| INCH Lbs. (N.m) |
| Crankshaft Position Sensor Bolt/Nut | 70 (7.9) |
| (1) Information is not available from manufacturer. |
| (1) | Information is not available from manufacturer. |
TORQUE SPECIFICATIONS (DAKOTA & DURANGO)
RAM PICKUP
| Application | Ft. Lbs. (N.m) |
|---|
| Front Drive Shaft-To-Front Axle Flange Bolt | 14 (19) |
| Front Drive Shaft Flange-To-Transfer Case Flange Bolt | 65 (88) |
| Rear Drive Shaft Center Bearing-To-Crossmember Bolt | 50 (68) |
| Rear Drive Shaft Universal Joint Strap-To-Rear Axle Flange Bolt |
| Dana Axle | 22 (30) |
| 9 1/4" Axle | 14 (19) |
| Starter Bolt |
| 5.9L (Diesel) | 32 (43) |
| All Others | 50 (68) |
| Torque Converter Bolt (1) |
| 10.75" (273.0 mm) Torque Converter | 23 (31) |
| 12.20" (273.0 mm) Torque Converter | 35 (47) |
| Transfer Case-To-Transmission Nut |
| 5/16" Stud | 22-30 (30-41) |
| 3/8" Stud | 30-35 (41-47) |
| Transmission Crossmember Bolt | 50 (68) |
| Transmission-To-Engine Block Bolt | (2) |
| INCH Lbs. (N.m) |
| Crankshaft Position Sensor Bolt | 70 (7.9) |
| (1) Bolt torque is determined by diameter of torque converter. (2) Information is not available from manufacturer. |
| (1) | Bolt torque is determined by diameter of torque converter. |
| (2) | Information is not available from manufacturer. |
TORQUE SPECIFICATIONS (RAM PICKUP)
RAM VAN & RAM WAGON
| Application | Ft. Lbs. (N.m) |
|---|
| Drive Shaft Universal Joint Strap-To-Rear Axle Flange Bolt | 14 (19) |
| Engine-To-Transmission Strut |
| Strut-To-Engine Block Bolt | 20-40 (27-54) |
| Strut-To-Transmission Bolt | 35-65 (47-88) |
| Rear Crossmember Bolt | 50 (68) |
| Starter Bolt/Nut | 50 (68) |
| Torque Converter Bolt (1) |
| 3-Bolt Configuration | 40 (54) |
| 4-Bolt Configuration |
| 9.50" (241.3 mm) | 55 (74) |
| 10.00" (254.0 mm) | 55 (74) |
| 10.75" (273.1 mm) | 23 (31) |
| Transmission-To-Engine Block Bolt |
| Large Bolt | 35-65 (47-88) |
| Small Bolt | 20-40 (27-54) |
| INCH Lbs. (N.m) |
| Crankshaft Position Sensor Bolt | 70 (7.9) |
| (1) Bolt torque is determined by diameter of torque converter and/or number of torque converter bolt lugs. |
| (1) | Bolt torque is determined by diameter of torque converter and/or number of torque converter bolt lugs. |
TORQUE SPECIFICATIONS (RAM VAN & RAM WAGON)
