Starting - Service Information: Overview Dodge Dart PF

OPERATION

The remote start antenna interfaces with the Ignition Module through a coaxial electrical cable and electrical connector. The antenna helps to amplify the signal for the Remote Keyless Entry (RKE) key fob.

Scheme 8

1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the rear shelf. Refer to «PANEL, REAR SHELF, REMOVAL»(ref-646233-S21392130702014072800000) .
3. Remove the two push-in plastic fasteners that secure the Radio Frequency Hub Module (RFHM) (1) to the shelf panel support.
4. If the vehicle is so equipped, disconnect the remote start antenna (3) connector from the RFHM.
5. Disconnect the body wire harness (2) connector or connectors from the RFHM.
6. Remove the RFHM from the vehicle.