CAMSHAFT POSITION SENSOR
Note. Camshaft position sensor on 3.3L and 3.8L engine is located on engine adjacent to right engine mount. On 8.0L, sensor is located in left side of timing cover, next to water pump. Ensure new paper spacer is installed with sensor.
FUEL SYSTEM PRESSURE RELEASE
| CAUTION | ALWAYS relieve pressure before disconnecting any fuel injection-related components. DO NOT allow fuel to contact engine or electrical components. |
Disconnect negative battery cable. Loosen fuel filler cap to release tank pressure. Remove protective cap from pressure test port on fuel rail. Using appropriate fuel pressure gauge/hose with gauge removed, place gauge end of hose into approved gasoline container. To release pressure, screw other end of hose onto pressure test port. After pressure is released, remove hose from test port and install protective cap.