Home/Dodge/Dakota WS/Dodge Dakota WS (1994-1994)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 2.5L: Specifica…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 2.5L: Specifications Dodge Dakota WS

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Alternator Bracket-To-Intake Manifold Bolt40 (54)
Coolant Temperature Sensor20 (28)
Cylinder Head-To-Intake Manifold Strut Bolts40 (54)
Distributor Hold-Down Bolt17 (23)
EGR Tube Flange-To-Manifold17 (23)
Fuel Tank Attaching Bolts
Caravan & Voyager40 (54)
Fuel Tank Attaching Nuts
Dakota35 (47)
Manifold Charge Air Temperature Sensor10 (14)
Oxygen Sensor22 (30)
Throttle Body Mounting Nuts15 (20)
INCH Lbs. (N.m)
Camshaft Position Sensor Bolt50 (6.0)
Crossover Tube Hold-Down Bolt95 (11.0)
Fuel Injector Torx Screws35-45 (4.0-5.0)
Fuel Pressure Regulator Attaching Bolts40 (5.0)
Fuel Pump Module Retaining Clamp40 (5.0)
Throttle Body Temperature Sensor105 (12.0)
Throttle Position Sensor Screws20 (2.3)

TORQUE SPECIFICATIONS