Engine Cooling System: Overhaul Dodge Caliber I рестайлинг

ASSEMBLY

1. Thoroughly clean all gasket mating surfaces before assembling.
2. Inspect water pump and components for any damage. Refer to «PUMP, Water, Inspection»(ref-463907-S14139596782012041600000) .
3. Using bolts (3), install the water pump (4) and gasket (8) to the water pump adapter (6). Tighten the bolts (3) to 22 N-m (16 lbs. ft.)
4. Using bolts (1), install the water pump pulley (2) to the water pump (4). Tighten the bolts (1) to 9 N-m (80 lbs. in.)
5. Using bolts (5), install the water pump assembly and gasket to the engine block. Tighten the bolts to 24 N.m (18 lbs. ft.). Refer to «PUMP, Water, Installation»(ref-463907-S24334832082012041600000) or «PUMP, Water, Afterrun, Installation»(ref-463907-S06641562992012041600000) .
6. Start the engine and check for leaks. Refer to «Diagnosis and Testing»(ref-463907-S29320878212012041600000) .