FLUID - CAPACITIES & RECOMMENDED
| Component | Fluids, Lubricants and Genuine Parts |
|---|---|
| Engine Coolant | Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile (5 Year/161,000 km) Formula HOAT (Hybrid Organic Additive Technology) or equivalent. |
| Engine Oil | Use API Certified SAE 5W-20 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting DaimlerChrysler Material Standard MS-6395. |
| Engine Oil Filter | Mopar ® 04884900AB or equivalent. |
| Spark Plugs | Refer to the Vehicle Emission Control Information label in the engine compartment. |
| Fuel Selection | 87 Octane (R + M)/2 DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. |
ENGINE
| Component | Fluids, Lubricants and Genuine Parts |
|---|---|
| Engine Coolant - Gasoline Engines | Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile (5 Year/160,000 km) Formula HOAT (Hybrid Organic Additive Technology) or equivalent. |
| Engine Coolant - Diesel Engine | Glysantin G 30-91. |
| Engine Oil - Gasoline | For best performance and maximum protection under all types of operating conditions, use SAE 5W-30 engine oils that meet the requirements of MB 229.31/MB229.51. Use Mopar or an equivalent oil approved to MB 229.31/MB229.51. |
| Engine Oil - Diesel | Diesel Engine (Use Synthetic: ACEA A3/B3, A3/B4, or A3/B4/C3; SAE 5W-30, SAE 0W-40, SAE 5W-40, SAE 10W-40, or SAE 15W-40 Engine Oil.) |
| Engine Oil Filter - Gasoline Engines | Mopar ® 04884900AB or equivalent. |
| Engine Oil Filter - Diesel Engine | Mopar® 04884700AA |
| Spark Plugs | Refer to the Vehicle Emission Control Information label in the engine compartment. |
| Fuel Selection - Gasoline Engines | 91 Research Octane Number (RON) |
| Fuel Selection - Diesel Engines | European low sulfur diesel. Cetane: 50 minimum, Sulfur 50 ppm maximum. (intermittent use of up to 350 ppm sulfur fuel can be tolerated, but emissions performance will degrade) |
ENGINE - EXPORT
| Component | Fluids, Lubricants and Genuine Parts |
|---|---|
| Automatic Transaxle Fluid | Mopar ® CVTF + 4 |
| Manual Transaxle Fluid | Mopar ® ATF+4 MS9602 |
| Rear Drive Assembly (RDA) | Mopar ® Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non-synthetic product. |
| Power Transfer Unit (PTU) | Mopar ® Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non-synthetic product. |
| Brake Master Cylinder | Mopar ® DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids or equivalent. |
| Power Steering Reservoir | Mopar ® Power Steering Fluid +4 or Mopar ® ATF+4 Automatic Transmission Fluid. |
CHASSIS
| DESCRIPTION | U.S. | Metric |
|---|---|---|
| Fuel (Approximate) | 13.5 Gallons | 51.0 Liters |
| Engine Oil-With Filter | ||
| All Gasoline Engines (Use API Certified SAE 5W-20 Engine Oil.) | 4.5 Quarts | 4.26 Liters |
| Cooling System * | ||
| Mopar® Antifreeze/Coolant 5 Year/100,000 Miles (5 Year/161,000 km) Formula, or equivalent. | 7.2 Quarts | 6.8 Liters |
| Automatic Transmission Fluid with filter and fluid only | 14.8 Pints | 7.0 Liters |
| Automatic Transmission Fluid with transmission overhaul | 17.1 Pints | 8.1 Liters |
| Rear Drive Assembly (RDA) | 16.9 oz. or fill to bottom of fill plug | 500 ml or fill to bottom of fill plug |
| Power Transfer Unit (PTU) | 15.2 oz. or fill to bottom of fill plug | 450 ml or fill to bottom of fill plug |
| Manual Transaxle Fluid | 2.5-2.8 Quarts | 2.4-2.7 Liters |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
CAPACITIES
| DESCRIPTION | U.S. | Metric |
|---|---|---|
| Fuel (Approximate) | 13.5 Gallons | 51.0 Liters |
| Engine Oil-With Filter | ||
| All Gasoline Engines (Use MB 229.31/MB229.51; SAE 5W-30) | 4.5 Quarts | 4.26 Liters |
| Diesel Engine (Use Synthetic ACEA A3/B4 or A3/B4/C3; SAE 5W-30, SAE 0W-40, SAE 5W-40, SAE 10W-40, or SAE 15W-40, Engine oil.) | 4.2 Quarts | 4.0 Liters |
| Cooling System * | ||
| All Gasoline Engines use Mopar ® Antifreeze/Coolant 5 Year/100,000 Miles (5 Year/160,000 km) Formula, or equivalent. | 7.2 Quarts | 6.8 Liters |
| All Diesel Engines use Glysantin G 30-91 coolant. | 8.5 Quarts | 8.0 Liters |
| Automatic Transmission Fluid with filter and fluid only | 14.8 Pints | 7.0 Liters |
| Automatic Transmission Fluid with transmission overhaul | 17.1 Pints | 8.1 Liters |
| Rear Drive Assembly (RDA) | 16.9 oz. or fill to bottom of fill plug | 500 ml or fill to bottom of fill plug |
| Power Transfer Unit (PTU) | 15.2 oz. or fill to bottom of fill plug | 450 ml or fill to bottom of fill plug |
| Manual Transaxle Fluid | 2.5-2.8 Quarts | 2.4-2.7 Liters |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
CAPACITIES - EXPORT
SPECIFICATIONS
In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully review this information to tow your load as efficiently and safely as possible.
To maintain warranty coverage, follow the requirements and recommendations concerning vehicles used for trailer towing.