FUSE LOCATIONS & TYPES
An Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover.
| Cavity | Cartridge Fuse | Mini Fuse | Description |
|---|
| 1 | Empty | | Empty |
| 2 | | 20 Amp Yellow | AWD ECU Feed |
| 3 | | 10 Amp Red | CHMSL Brake Switch Feed |
| 4 | | 10 Amp Red | Ignition Switch Feed |
| 5 | | 20 Amp Yellow | Trailer Tow |
| 6 | | 10 Amp Red | IOD Sw/Pwr Mir/Ocm Steering Cntrl Sdar/Hfm |
| 7 | | 30 Amp Green | IOD Sense1 |
| 8 | | 30 Amp Green | IOD Sense2 |
| 9 | 40 Amp Green | | Power Seats |
| 10 | | 20 Amp Yellow | CCN Power Locks |
| 11 | | 15 Amp Lt Blue | Power Outlet |
| 12 | | 20 Amp Yellow | Ign Run/Acc Inverter |
| 13 | | 20 Amp Yellow | Pwr run/Acc Outlet RR |
| 14 | | 10 Amp Red | IOD CCN/ Interior Lighting |
| 15 | 40 Amp Green | | RAD Fan Relay Battery Feed |
| 16 | | 15 Amp Lt. Blue | IGN Run/Acc Cigar Ltr/Sunroof |
| 17 | | 10 Amp Red | IOD Feed Mod-Wcm |
| 18 | 40 Amp Green | | ASD Relay Contact PWR Feed |
| 19 | | 20 Amp Yellow | PWR Amp 1 & Amp 2 Feed |
| 20 | | 15 Amp Lt. Blue | IOD Feed Radio |
| 21 | | 10 Amp Red | IOD Feed Intrus Mod/Siren |
| 22 | | 10 Amp Red | IGN RUN HVAC/Compass Sensor |
| 23 | | 15 Amp Lt. Blue | ENG ASD Relay Feed 3 |
| 24 | | 15 Amp Lt. Blue | PWR Sunroof Feed |
| 25 | | 10 Amp Red | Heated Mirror |
| 26 | | 15 Amp Lt. Blue | ENG ASD Relay Feed 2 |
| 27 | | 10 Amp Red | IGN RUN Only ORC Feed |
| 28 | | 10 Amp Red | IGN RUN ORC/OCM Feed |
| 29 | | | Hot Car (No Fuse Required) |
| 30 | | 20 Amp Yellow | Heated Seats |
| 31 | | 10 Amp Red | Headlamp Washer Relay Control |
| 32 | 30 Amp Pink | | ENG ASD Control Feed 1 |
| 33 | | 10 Amp Red | ABS MOD/J1962 Conn/PCM |
| 34 | 30 Amp Pink | | ABS Valve Feed |
| 35 | 40 Amp Green | | ABS Pump Feed |
| 36 | 30 Amp Pink | | Headlamp Washer Control / Smart Glass |
| 37 | | 25 Amp Natural | 110 Inverter |
| CAUTION | When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. |
| CAUTION | When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected. |
