POSSIBLE CAUSES
| Possible Causes |
|---|
| MODULE NOT CALIBRATED |
| EXPRESS WINDOW SWITCH |
| DRIVER DOOR MODULE (DDM) |
Note. This condition can happen anytime the battery or the door module connector is disconnected.
| Possible Causes |
|---|
| MODULE NOT CALIBRATED |
| MODULE NOT DENORMALIZED |
| DRIVER DOOR MODULE (DDM) |
Note. Anytime a window or window regulator is replaced, this procedure must be used. This condition may also happen when the battery or the door module connector is disconnected.
| Possible Causes |
|---|
| MODULE NOT CALIBRATED |
| EXPRESS WINDOW SWITCH |
| PASSENGER DOOR MODULE (PDM) |
Note. This condition can happen anytime the battery or the door module connector is disconnected.
| Possible Causes |
|---|
| MODULE NOT CALIBRATED |
| MODULE NOT DENORMALIZED |
| PASSENGER DOOR MODULE (PDM) |
Note. Anytime a window or window regulator is replaced, this procedure must be used. This condition may also happen when the battery or the door module connector is disconnected.
| Possible Causes |
|---|
| WINDOW HALL SENSOR A OR SENSOR B SIGNAL CIRCUITS OPEN |
| WINDOW MOTOR (HALL SENSOR OPEN) |
REAR WINDOW MOTOR INOPERATIVE - JS41 BASE ONLY
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article .
Note. The graphics in this test show the Left Rear connectors, the Right side connectors are similar, refer to the appropriate Wiring Information for the connector pinouts.