Vehicle concerned
CITROEN C3
From diagnostic CD N° 33
CITROEN C2
From diagnostic CD N° 33
CITROEN C1
From diagnostic CD N° 33
CITROEN BERLINGO - van
From diagnostic CD N° 33
CITROEN C3 PLURIEL
From diagnostic CD N° 33
CITROEN BERLINGO - private car
From diagnostic CD N° 33
CITROEN BERLINGO - van
From diagnostic CD N° 33
CITROËN XSARA
From diagnostic CD N° 33
CITROEN C5
From diagnostic CD N° 33
Summary
Safety recommendations
Preliminary operations
Configuration
Configuration tables
Safety recommendations
NoteThe configuration operation is a delicate operation which has direct consequences for the operation of the vehicle
Incorrect configuration can have adverse effects on
- Safety (deactivation of the vehicle's protection systems)
- The overall operation of the vehicle (down-grading or complete loss of the vehicle's functions)
- Vehicle diagnostics (recording of fault codes that can cause the diagnostic tool's diagnostic methods to fail, leading to unjustified replacements of parts)
Before any attempt to start the engine
- Check that the parking brake is activated
- If an automatic gearbox, check that the gear lever is in position "P" (Park)
- If a manual gearbox, check that the gear lever is in neutral
Preliminary operations
Before any operations
- Establish communication with the ECU; using the diagnostic tool
- Print out all the diagnostic tool screens that indicate the configuration parameter values, or note down these values by hand
Configuration
If configuring the ECU
- Establish communication with the ECU
- Perform the configuration by internet
- Check the download
If replacing an ECU
- Fit the new ECU
- Establish communication with the ECU
- Perform the configuration by internet
- Check the download
- Perform the programming operations (if necessary)
Configuration tables
After selecting the "manual configuration" menu, the following menus are available
- Diesel injection ECU SID 801
- Diesel injection ECU SID 802
- Diesel injection ECU SID 804 (Euro3 Non EOBD)
- Diesel injection ECU SID 804 (Euro3 EOBD / Euro4)
- Diesel injection ECU SID 805
NoteThe parameters of the "customer options" menu are also present on the configuration menu, so it is not necessary to configure these if the parameters of the "configuration" menu have already been, or are going to be, configured
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | control by chopper | ||
| air conditioning pressure sensor | no air conditioning | without air conditioning | |
| linear pressure switch | simple air conditioning or air conditioning with automatic regulation | ||
| anti-lock braking system (ABS) ECU | absent | vehicle with neither ABS nor ESP | |
| present | vehicle with ABS or ESP | ||
| additional heating | no additional heating | without an additional heating resistor | |
| with additional heating resistor | with additional heating resistor | ||
| electronic stability control (ESP) | with ESP | check the presence of the ESP deactivation button | |
| without ESP | check the absence of the ESP deactivation button | ||
| cruise control (RVV) | with cruise control (RVV) | check the presence of the control at the steering wheel for cruise control | |
| without cruise control (RVV) | check the absence of the control at the steering wheel for cruise control |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | control by chopper | ||
| air conditioning pressure sensor | no air conditioning | without air conditioning | |
| linear pressure switch | simple air conditioning or air conditioning with automatic regulation | ||
| anti-lock braking system (ABS) ECU | absent | vehicle with neither ABS nor ESP | |
| present | vehicle with ABS or ESP | ||
| additional heating | no additional heating | without an additional heating resistor | |
| with additional heating resistor | with additional heating resistor | ||
| electronic stability control (ESP) | with ESP (ESP) | check the presence of the ESP deactivation button | |
| without stability control (ESP) | check the absence of the ESP deactivation button | ||
| cruise control (RVV) | with cruise control (RVV) | check the presence of the control at the steering wheel for cruise control | |
| without cruise control (RVV) | check the absence of the control at the steering wheel for cruise control |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| gearbox | long gearbox | gearbox: NORMAL | |
| short gearbox | gearbox (Brio Mercosur) | ||
| piloted manual gearbox | check the presence of the gear control paddles under the steering wheel | ||
| cooling system | control by chopper | ||
| air conditioning pressure sensor | no air conditioning | without air conditioning | |
| linear pressure switch | simple air conditioning or air conditioning with automatic regulation | ||
| additional heating | no additional heating | without an additional heating resistor | |
| with additional heating resistor | with additional heating resistor | ||
| electronic stability control (ESP) | with ESP (ESP) | check the presence of the ESP deactivation button | |
| without stability control (ESP) | check the absence of the ESP deactivation button | ||
| cruise control (RVV) | with cruise control (RVV) | check the presence of the control at the steering wheel for cruise control | |
| without cruise control (RVV) | check the absence of the control at the steering wheel for cruise control | ||
| anti-lock braking system (ABS) ECU | ABS missing | vehicle with neither ABS nor ESP | |
| Multiplexed ABS or ESP present | vehicle with ABS or ESP | ||
| speed limiter | Without vehicle speed limitation | check the presence of the control for the speed limiter | |
| without speed limiter | check the absence of the control for the speed limiter | ||
| Gearbox info | with CAN automatic or sequential gearbox | not configured | |
| Automatic gearbox or controlled manual gearbox absent | vehicle with manual gearbox or controlled manual gearbox (*) | ||
| built-in systems interface | with CAN built-in systems interface (BSI) |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| gearbox | long gearbox | gearbox: NORMAL | |
| short gearbox | gearbox (Brio Mercosur) | ||
| piloted manual gearbox | check the presence of the gear control paddles under the steering wheel | ||
| cooling system | control by chopper | ||
| air conditioning pressure sensor | no air conditioning | without air conditioning | |
| linear pressure switch | simple air conditioning or air conditioning with automatic regulation | ||
| additional heating | no additional heating | without an additional heating resistor | |
| with additional heating resistor | with additional heating resistor | ||
| electronic stability control (ESP) | with ESP (ESP) | check the presence of the ESP deactivation button | |
| without stability control (ESP) | check the absence of the ESP deactivation button | ||
| cruise control (RVV) | with cruise control (RVV) | check the presence of the control at the steering wheel for cruise control | |
| without cruise control (RVV) | check the absence of the control at the steering wheel for cruise control | ||
| anti-lock braking system (ABS) ECU | ABS missing | vehicle with neither ABS nor ESP | |
| Multiplexed ABS or ESP present | vehicle with ABS or ESP | ||
| speed limiter | Without vehicle speed limitation | check the presence of the control for the speed limiter | |
| without speed limiter | check the absence of the control for the speed limiter | ||
| Gearbox info | with CAN automatic or sequential gearbox | value not to be configured | |
| Automatic gearbox or controlled manual gearbox absent | vehicle with manual gearbox or controlled manual gearbox (*) | ||
| built-in systems interface | with CAN built-in systems interface (BSI) |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | 1-speed fan assembly | without air conditioning | |
| 2 -speed fan unit | with air conditioning | ||
| air conditioning pressure sensor | absent | without air conditioning | |
| present | simple air conditioning or air conditioning with automatic regulation | ||
| additional heating | no additional heating | without an additional heating resistor | |
| with additional heating resistor | with additional heating resistor |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | 1-speed fan assembly | without air conditioning | |
| 2 or 3 speed fan assembly | with air conditioning | ||
| control by chopper | value not to be configured | ||
| air conditioning pressure sensor | no air conditioning | absence of air conditioning | |
| 3-level pressostat | vehicle with air conditioning | ||
| 4-level pressostat | vehicle with air conditioning | ||
| linear pressure switch | value not to be configured | ||
| Vehicle speed info | wired information | vehicle with or without ABS and without ESP | |
| Information on CAN network | value not to be configured | ||
| additional heating | no additional heating | value not to be configured | |
| plugs or elements operated by the BSI controlled by the engine ECU | 2 plugs immersed in the water, or heating elements (located in the heating unit) operated by the engine ECU | ||
| burner controlled by the engine ECU | check the presence of the additional heating (type WEBASTO or EBERSPÄCHER) | ||
| computer | wire BSI without stability control (ESP) and without cruise control (RVV) | valued to be configured | |
| multiplexed BSI without stability control (ESP) and without cruise control (RVV) | value not to be configured | ||
| multiplexed BSI with stability control (ESP) but without cruise control (RVV) | value not to be configured | ||
| multiplexed BSI without stability control (ESP) but with cruise control (RVV) | value not to be configured | ||
| multiplexed BSI with stability control (ESP) and with cruise control (RVV) | value not to be configured |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | 1-speed fan assembly | value not to be configured | |
| 2 or 3 speed fan assembly | with air conditioning | ||
| control by chopper | visually check that there is a variable-speed fan module | ||
| air conditioning pressure sensor | no air conditioning | absence of air conditioning | |
| 3-level pressostat | value not to be configured | ||
| 4-level pressostat | vehicle with air conditioning | ||
| linear pressure switch | vehicle with air conditioning | ||
| Vehicle speed info | wired information | vehicle with or without ABS and without ESP | |
| Information on CAN network | vehicle with ESP | ||
| additional heating | no additional heating | without additional heating | |
| plugs or elements operated by the BSI controlled by the engine ECU | 2 plugs immersed in the water, or heating elements (located in the heating unit) operated by the engine ECU | ||
| burner controlled by the engine ECU | check the presence of the additional heating (type WEBASTO or EBERSPÄCHER) | ||
| computer | wire BSI without stability control (ESP) and without cruise control (RVV) | value not to be configured | |
| multiplexed BSI without stability control (ESP) and without cruise control (RVV) | value to be configured as a function of the equipment that is present - the ESP deactivation button confirms the presence of the ESP - the presence of cruise control switches at the steering wheel confirms the presence of cruise control | ||
| multiplexed BSI with stability control (ESP) but without cruise control (RVV) | |||
| multiplexed BSI without stability control (ESP) but with cruise control (RVV) | |||
| multiplexed BSI with stability control (ESP) and with cruise control (RVV) |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | 1-speed fan assembly | value not to be configured | |
| 2 or 3 speed fan assembly | with air conditioning | ||
| control by chopper | visually check that there is a variable-speed fan module | ||
| air conditioning pressure sensor | no air conditioning | absence of air conditioning | |
| 3-level pressostat | value not to be configured | ||
| 4-level pressostat | value not to be configured | ||
| linear pressure switch | vehicle with air conditioning | ||
| Vehicle speed info | wired information | vehicle with or without ABS and without ESP | |
| Information on CAN network | vehicle with ESP | ||
| additional heating | no additional heating | value not to be configured | |
| plugs or elements operated by the BSI controlled by the engine ECU | 2 plugs immersed in the water, or heating elements (located in the heating unit) operated by the engine ECU | ||
| burner controlled by the engine ECU | check the presence of the additional heating (type WEBASTO or EBERSPÄCHER) | ||
| computer | wire BSI without stability control (ESP) and without cruise control (RVV) | value not to be configured | |
| multiplexed BSI without stability control (ESP) and without cruise control (RVV) | value to be configured as a function of the equipment that is present - the ESP deactivation button confirms the presence of the ESP - the presence of cruise control switches at the steering wheel confirms the presence of cruise control | ||
| multiplexed BSI with stability control (ESP) but without cruise control (RVV) | |||
| multiplexed BSI without stability control (ESP) but with cruise control (RVV) | |||
| multiplexed BSI with stability control (ESP) and with cruise control (RVV) |
| parameter to be configured | values to be configured | comments | |
|---|---|---|---|
| cooling system | 1-speed fan assembly | value not to be configured | |
| 2 or 3 speed fan assembly | with air conditioning | ||
| control by chopper | visually check that there is a variable-speed fan module | ||
| air conditioning pressure sensor | no air conditioning | absence of air conditioning | |
| 3-level pressostat | value not to be configured | ||
| 4-level pressostat | value not to be configured | ||
| linear pressure switch | vehicle with air conditioning | ||
| Vehicle speed info | wired information | value not to be configured | |
| Information on CAN network | vehicle with ESP | ||
| additional heating | no additional heating | value not to be configured | |
| plugs or elements operated by the BSI controlled by the engine ECU | 2 plugs immersed in the water, or heating elements (located in the heating unit) operated by the engine ECU | ||
| burner controlled by the engine ECU | check the presence of the additional heating (type WEBASTO or EBERSPÄCHER) | ||
| computer | wire BSI without stability control (ESP) and without cruise control (RVV) | value not to be configured | |
| multiplexed BSI without stability control (ESP) and without cruise control (RVV) | the ESP deactivation button confirms the presence of the ESP the presence of cruise control switches at the steering wheel confirms the presence of cruise control | ||
| multiplexed BSI with stability control (ESP) but without cruise control (RVV) | value not to be configured | ||
| multiplexed BSI without stability control (ESP) but with cruise control (RVV) | value not to be configured | ||
| multiplexed BSI with stability control (ESP) and with cruise control (RVV) | value not to be configured |