Additional operations
WarningAll of the stripped surfaces must be protected by means of the approved electrolytic rezincing process (C8)
Replacement: centre pillar assembly
Identification of the replacement parts
(1) centre pillar inner panel assembly
Composition
(2) centre pillar inner panel
(3) seat belt stiffener
Parts required
(1) centre pillar inner panel assembly
Preparation of the new part
Prepare the mating edges and protect them using a weldable primer (C7)
Cutting out
Cut out by milling out the spot welds
From the inside: cut out by milling out the spot welds
Separating
Prepare the mating edges and protect them using a weldable primer (C7)
Welding
Fit the centre pillar inner panel assembly
Weld with electric spot welds (AB1 equipment)
Weld with electric spot welds (AB1 equipment)