Compass Calibration and Variance Procedures
When the inside rearview mirror with compass is replaced, the compass must be setup utilizing the Compass Calibration and Magnetic Variance (Mirror) or Compass Calibration and Magnetic Variance (DIC) .
See also:
• Auxiliary Heater and Air Conditioning Control Module Scan Tool Information
• Body Control Module Scan Tool Information
• Communication Interface Module Scan Tool Information
• Transmission Control Module Scan Tool Information (6T70)
• Automatic Transmission Controls Schematics
• Digital Radio Receiver Scan Tool Information
• Door Lock Control Module Scan Tool Information (Driver Door Switch)
• Electronic Brake Control Module Scan Tool Information
• Engine Control Module Scan Tool Information (V6)
• Engine Controls Schematics
• Fuel Pump Flow Control Module Scan Tool Information
• Heating, Ventilation and Air Conditioning Control Module Scan Tool Information
• Inflatable Restraint Passenger Presence System Scan Tool Information
• Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
• Instrument Cluster Scan Tool Information
• Liftgate Close Actuator Motor Control Module Scan Tool Information
• Driver Seat Adjuster Memory Module Scan Tool Information
• Radio Scan Tool Information
• Rear Differential Clutch Control Module Scan Tool Information
• Rear Object Alarm Module Scan Tool Information
• Remote Control Door Lock Receiver Scan Tool Information
• Theft Deterrent Module Scan Tool Information