Configurable Customer Control System: Removal & Installation Chevrolet TrailBlazer I рестайлинг

Removal Procedure

1. Remove the steering wheel. Refer to «Steering Wheel Replacement»(ref-277728-S11751719722008011800000) .
2. Remove the shroud retaining screws from the back of the steering wheel.
3. Remove the shroud from the steering wheel.
4. Position a blunt ended tool into the wire harness cavity (1) and apply moderate pressure in order to partially remove the steering wheel control switch from the steering wheel.
5. Disconnect the steering wheel control switch electrical connector.
6. Remove the steering wheel control switch from the steering wheel.

Installation Procedure

1. Position the steering wheel control switch to the steering wheel.
2. Connect the electrical connector to the steering wheel control switch.
3. Install the steering wheel control switch into the steering wheel, ensuring the retaining tabs are fully seated.
4. Install the shroud to the steering wheel.
5. Install the shroud retaining screws to the steering wheel. Tighten: Tighten the screws to 2 N.m (18 lb in).
6. Install the steering wheel. Refer to «Steering Wheel Replacement»(ref-277728-S11751719722008011800000) .