Home ReviewsRefund
Home/Chevrolet/Silverado 3500/Chevrolet Silverado 3500 (2002-2006)/Repair manual/Communication Devices/Body Control System: Removal & Installation
Contents Wiring diagrams Section: Communication Devices All sections

Body Control System: Removal & Installation Chevrolet Silverado 3500

Communication Devices ~112 words

Removal Procedure

  1. Disconnect the negative battery cable(s).
  2. Remove the knee bolster. Refer to «Knee Bolster Replacement»(ref-184121-S33691865652005082200000) in Instrument Panel, Gages, and Console.
  3. Disconnect the brown connector.
  4. Disconnect all other connectors (1).
  5. Remove the BCM from the sliding bracket.

Installation Procedure

  1. Slide the BCM onto the bracket.
  2. Connect all the connectors (1) except the brown connector.
  3. Connect the brown connector.
  4. Install the knee bolster. Refer to «Knee Bolster Replacement»(ref-184121-S33691865652005082200000) in Instrument Panel, Gages, and Console.
  5. Connect the negative battery cable(s).
  6. Reprogram the BCM. Refer to «Body Control Module (BCM) Programming/RPO Configuration»(ref-184112-S22028469402005082200000) .
  7. Perform the Passlock Learn Procedure. Refer to «Programming Theft Deterrent System Components»(ref-184154-S04937401262005082200000) in Theft Deterrent

More articles — Body Control System