FLUID CAPACITIES
The following refill capacities given are approximate. Correct fluid level should always be determined by marks on dipstick, rather than amount of fluid added. DO NOT overfill. See TRANSMISSION FLUID CAPACITIES table.
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|---|---|
| 4L60-E & 4L65-E | 5.0 (4.7) | 11.2 (10.6) |
TRANSMISSION FLUID CAPACITIES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Exhaust Pipe Hanger Bracket Bolts | 12 (17) |
| Extension Housing Bolt | 33 (45) |
| Filler Tube Stud | 35 (47) |
| Forward Servo Cover Bolt | 18 (24) |
| Heat Shield Bolt | 13 (17) |
| Indicator Tube Nut | 13 (18) |
| Insulator Nuts | 12 (17) |
| Left Exhaust Pipe Nuts | 37 (50) |
| Oil Pan Drain Plug | 13 (18) |
| Park Lock Bracket Bolt | 18 (24) |
| Park/Neutral Position Switch Bolt | 18 (24) |
| Reverse Servo Cover Bolt | 18 (24) |
| Right Exhaust Pipe Nuts | 37 (50) |
| Shift Cable Bracket Bolt | 18 (24) |
| Transmission Control Lever Nut | 18 (24) |
| Transmission Crossmember Bolts & Nuts | 70 (95) |
| Transmission Mount Nut | 37 (50) |
| INCH Lbs. (N.m) | |
| Accumulator-To-Case Bolt | 97 (11) |
| Auxiliary Oil Cooler Support Bolt | 106 (12) |
| Control Valve Body Bolts | 97 (11) |
| Filler Tube Bolt | 53 (6) |
| Fluid Pressure Switch | 97 (11) |
| Manual Detent Spring Bolt | 97 (11) |
| Oil Pan Bolt | 97 (11) |
| Oil Pass Cover Bolt | 97 (11) |
| Pressure Control Solenoid Bolt | 97 (11) |
| Shift Cable Brace Bolt | 89 (10) |
| TCC Solenoid Bolt | 97 (11) |
| Transmission Fluid Indicator Stop Bolt | 97 (11) |
| Valve Body-To-Case Bolt (1) | 97 (11) |
| Vent Tube Clamp | 89 (10) |
| VSS Bolt | 97 (11) |
| (1) Tighten valve body bolts in a spiral pattern starting in center of valve body. | |
| (1) | Tighten valve body bolts in a spiral pattern starting in center of valve body. |
TORQUE SPECIFICATIONS