FLUID CAPACITIES
The following refill capacities given are approximate. Correct fluid level should always be determined by marks on dipstick, rather than amount of fluid added. DO NOT overfill. See TRANSMISSION FLUID CAPACITIES table.
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|---|---|
| 4L80-E & 4L85-E | 7.7 (7.3) | 13.5 (12.8) |
TRANSMISSION FLUID CAPACITIES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Auxiliary Oil Cooler Nut | 17 (23) |
| Extension Housing Bolt | 25 (34) |
| Filler Tube Nut | 18 (24) |
| Filler Tube Stud | 35 (47) |
| Forward Servo Cover Bolt | 18 (24) |
| Heat Shield Bolt | 13 (17) |
| Manual Shaft Nut | 18 (24) |
| Oil Level Indicator Nut | 35 (47) |
| Oil Pan Bolts | 18 (24) |
| Oil Pan Drain Plug | 13 (18) |
| Park Lock Bracket Bolt | 18 (24) |
| Park/Neutral Position Switch Bolt | 18 (24) |
| Reverse Servo Cover Bolt | 18 (24) |
| Shift Cable Bracket Bolt | 18 (24) |
| Transmission Control Lever Nut | 18 (24) |
| Transmission Mount Nuts | 30 (40) |
| Transmission Support Bolts & Nuts | 70 (95) |
| INCH Lbs. (N.m) | |
| Accumulator-To-Case Bolt | 97 (11) |
| Auxiliary Oil Cooler Support Bolt | 106 (12) |
| Fluid Pressure Switch | 97 (11) |
| Manual Detent Spring Bolt | 97 (11) |
| Oil Pass Cover Bolt | 97 (11) |
| Pressure Control Solenoid Bolt | 97 (11) |
| Shift Cable Bracket Bolt | 89 (10) |
| TCC Solenoid Bolt | 97 (11) |
| Transmission Fluid Indicator Stop Bolt | 97 (11) |
| Valve Body-To-Case Bolt | 97 (11) |
| Vent Tube Clamp | 89 (10) |
| VSS Bolt | 97 (11) |
TORQUE SPECIFICATIONS