Computer/integrating Systems: Removal & Installation Chevrolet RV Cutaway G3500

Removal Procedure

1. Remove the right side knee bolster trim panel. Refer to «Knee Bolster Replacement - Right»(ref-197831-S22008535172005101300000) in Instrument Panel, Gages, and Console.
2. Disconnect the electrical connectors (2) from the body control module (BCM) (1).
3. Release the tabs (2) retaining the BCM (1) to the bracket.
4. Remove the BCM (1) from the vehicle.

Installation Procedure

1. Install the BCM (1) into the bracket. Ensure the BCM (1) is engaged in the bracket, under the retaining tabs (2).
2. Connect the electrical connectors (2) to the BCM (1).
3. Install the right side knee bolster trim panel. Refer to «Knee Bolster Replacement - Right»(ref-197831-S22008535172005101300000) in Instrument Panel, Gages, and Console.
4. If you replaced the BCM, program the module. Refer to «Body Control Module (BCM) Programming/RPO Configuration»(ref-197824-S31418135412005101300000) .