Home ReviewsRefund
Home/Chevrolet/Equinox/Chevrolet Equinox I (2004-2009)/Repair manual/Mechanical/Engine Mount Inspection
Contents Wiring diagrams Section: Mechanical All sections

Engine Mount Inspection Chevrolet Equinox I

Mechanical ~143 words
  1. Install the engine support fixture. Refer to «Engine Support Fixture»(ref-239708-S10770509852006080100000) .
  2. Observe the engine mount while raising the engine. Raising the engine removes the weight from the engine mount and creates slight tension on the rubber.
  3. Replace the engine mount if the engine mount exhibits any of the following conditions: The hard rubber is covered with heat check cracks. The rubber is separated from the metal plate of the engine mount. The rubber is split through the center of the engine mount. The engine mount itself is leaking fluid.
  4. For engine mount replacement. Refer to the following procedures: «Engine Mount Replacement - Right»(ref-239708-S18598290812006080100000) «Engine Mount Bracket Replacement - Right»(ref-239708-S28699628882006080100000) «Transmission Mount Replacement - Rear»(ref-239707-S10875508812006080100000) in Automatic Transaxle - AF33-5 «Transmission Mount Replacement - Left»(ref-239707-S15829920252006080100000) in Automatic Transaxle - AF33-5 «Transmission Mount Bracket Replacement - Rear»(ref-239707-S00141562082006080100000) in Automatic Transaxle - AF33-5

More articles — Engine Mechanical - 3.4L