Home ReviewsRefund
Home/Cadillac/SRX/Cadillac SRX II facelift (2012-2016)/Repair manual/Communication Devices/Programming and Setup - All Systems: Maintenance
Contents Wiring diagrams Section: Communication Devices All sections

Programming and Setup - All Systems: Maintenance Cadillac SRX II facelift

Communication Devices

Valet Mode Reset

  1. Verify no DTCs are set. If any DTCs are set Refer to «Diagnostic Trouble Code (DTC) List - Vehicle»(ref-644698-S15398667192014072300000) . If no DTCs are set
  2. Select the Radio control function Erase Valet Mode Code with the scan tool.
  3. Select Clear and confirm the selection to erase the code.

More articles — Programming and Setup - All Systems