Home ReviewsRefund
Home/Buick/LeSabre/Buick LeSabre VII (1992-1999)/Repair manual/Mechanical/Removal & Installation (Right)
Contents Wiring diagrams Section: Mechanical All sections

Removal & Installation (Right) Buick LeSabre VII

Mechanical
  1. Disconnect negative battery cable. Remove air inlet duct. Remove throttle cable from throttle body. Remove brake booster hose. Remove serpentine belt and power steering pump bracket with hoses attached and position aside.
  2. Drain cooling system. Disconnect spark plug wires and oxygen sensor. Disconnect crossover pipe and exhaust pipe from manifold.
  3. Remove transaxle dipstick. Remove manifold heat shield (if equipped). Remove catalytic converter heat shield and pipe hanger. Remove exhaust pipe-to-manifold nuts. Remove engine lift bracket, manifold bolts, manifold and gasket. To install, reverse removal procedure. Use NEW gasket.

More articles — Engine Mechanical 3.8L V6 - VIN [L]