Installation (Lower) Buick LeSabre VII

1. Ensure sealing surfaces and bolt threads and holes are clean. Apply GM Sealant (12345336) at end of seals on cylinder block. Install manifold and gaskets. Coat bolt threads with thread locking compound.
2. Tighten bolts to specification in 2 steps, in sequence. (Scheme 2)
3. Lubricate fuel rail "O" rings with engine oil. To complete installation, reverse removal procedure. Fill and bleed cooling system. See «COOLING SYSTEM BLEEDING»(ref-50089-S31664630912001011600000).

Scheme 2