Home ReviewsRefund
Home/Buick/Century/Buick Century VI (1997-2005)/Repair manual/Automatic Transaxle Overhaul & Testing - 4t65-e/PARKING SYSTEM COMPONENTS
Contents Wiring diagrams Section: Automatic Transaxle Overhaul & Testing - 4t65-e All sections

PARKING SYSTEM COMPONENTS Buick Century VI

Automatic Transaxle Overhaul & Testing - 4t65-e 3 illustrations ~121 words

PARKING SYSTEM COMPONENTS

  1. Using side cutting pliers, remove manual shift shaft pin. DO NOT cut through pin. Protect case with piece of wood or rubber under pliers when removing pin. (Scheme 87) Remove manual valve link and spring from manual shift detent lever. Remove manual shift detent lever nut from manual shift shaft. Remove manual shift detent lever and remove parking pawl actuator. (Scheme 88)
  2. Position transaxle with reverse band servo bore facing up. Pull manual shift shaft out of case. Using small screwdriver, pry manual shift shaft seal from case. Remove parking pawl actuator guide pin. Remove parking pawl actuator guide from case. Remove actuator guide seal from guide. (Scheme 89)

Scheme 87

Scheme 87
Scheme 87

Scheme 88

Scheme 88
Scheme 88

Scheme 89

Scheme 89
Scheme 89