Home/BMW/Z3/BMW Z3 E36 рестайлинг (2000-2002)/Repair manual/Reset Procedures/Maintenance Reminder Light Reset Procedures: Overview
Contents Section: Reset Procedures All sections

Maintenance Reminder Light Reset Procedures: Overview BMW Z3 E36 рестайлинг

Reset Procedures ~232 words

DESCRIPTION & OPERATION

Starting in 1983 and ending on some models in 1999, service indicator on instrument panel consists of 5 Green, 3 Red and one Yellow Light Emitting Diodes (LED) and the inscriptions OIL SERVICE and INSPECTION. When ignition is on, as many as 5 Green LEDs will light up. The Green LEDs go out when the engine is started. If the Yellow LED glows and one of the inscriptions comes on and remains on when the engine is started, maintenance service is due immediately. When maintenance interval has been exceeded (after approximately 1000 miles) the Red LED's will come on in addition to the Yellow LED as a reminder for servicing.

Beginning on some models in 1999, a new method for displaying the service interval is used. Colored LEDs are no longer used to display the amount of time until the next service or inspection is due. The actual mileage remaining until the next service will be displayed for five seconds when the ignition is first switched on. The text OIL SERVICE or INSPECTION will also illuminate to show which service is due. A minus symbol (-) before the mileage display indicates that a service is past due.

The 2002-12 models with condition based service (CBS) interval system uses an entirely different service interval system. See SERVICE INTERVAL LIGHT RESET - PROCEDURE 3 .