Minimum set: Mechanical tools
In conjunction with: 12 1 171, 12 1 172
Note. For tightening spark plugs to torque limit
Engine: M40, M42, M43, M43TU, M44, M50, M52, M52TU, M54, M56, M60, M62, M70, M73, N40, N42, N45, N45T, N46, N46T, N51, N52, N52K, N73, N73H, S50US
Storage location: A9
SI number: 1 05 92 (507)
Order number: 12 1 200 Torque limiter 30 Nm
12 1 305 Zero-coded Cover Cap for 52-pin Test Box (12 1300/304)
Note. New plugs in E61/E61/E63 and E64 on SGM control unit Cover cap 12 1 300/305 for diagnosis on wiring harness. From 08/2004 cover cap will be supplied with test box.
SI number: 2 07 04 (138)
Order number: 12 1 305
Zero-coded cover cap for 52-pin test box (12 1300/304)
Minimum set: Measuring and testing equipment
Note. For engines with rod-type ignition coils for measuring secondary voltage
Engine: M54, M56, N40, N42, N43, N45, N45T, N46, N46T, N51, N52, N52K, N62, N73, S54
Storage location: F 104
SI number: 2 01 01 (671)
Order number: 12 7 050 Adapter lead
12 7 060 Antistatic Mat (ESD)
Note. ESD (Electro Static Discharge) For protection against ESD during repairs to electronic components. (Replaces the sub-number 12 7 192 from Eprom tool kit 12 7 190)
Series: E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2
SI number: 2 06 04 (128)
Order number: 12 7 060 Antistatic mat (ESD)
Note. For removing and installing pulley on alternator
Engine: M10, M21, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M57, M57T2, M57TU, M60, M62, M67, M70, M73, N42, N46, N46T, N52, N52K, N62, N73, S14, S50B30, S50B32, S65, S85
Storage location: A12
SI number: 1 12 93 (701)
Order number: 12 7 110 Socket wrench socket WAF 24
12 7 121 Counterholder Wrench
In conjunction with: Socket
Note. Alternator N42 engine
Order number: 12 7 121
Counterholder wrench
12 7 122 Socket
In conjunction with: Counterholder wrench
Note. Hazet 8808 lg10
SI number: 1 28 03 (051)
Order number: 12 7 122
Socket
12 7 190 Eprom tools / ID marking
Note. Set no longer available. Antistatic mat can be ordered using number 12 7 060. SEE 12 7 060 Antistatic mat (ESD) .
Storage location: J 101
Order number: 12 7 190
Eprom tools / ID marking
Consisting of
1 = 12 7 191 Eprom puller pliers
Note. No longer available. Antistatic mat can be ordered using special tool number 12 7 060 (see 12 7 060 Antistatic mat (ESD) ).
2 = 12 7 192 Antistatic mat
Note. Is replaced by main number 12 7 060, see 12 7 060 Antistatic mat (ESD)
12 7 200 Set of tools
Note. For opening & closing control unit box
Storage location: J 106
Order number: 12 7 200
Set of tools
Consisting of
1 = 12 7 201 Pliers
Note. For bending open tab washers
2 = 12 7 202 Lever
Note. For bending tab washers
3 = 12 7 203 Pliers
Note. For closing tab washers
4 = 12 7 204 Torx socket T20
5 = 12 7 205 Torx socket T10
6 = 12 7 206 Fine pen
Note. Black, waterproof
8 = 12 7 208 Slotted screwdriver 2 mm
9 = 12 7 209 Straightening tool
Note. For Eprom connections
12 7 210 Control unit seal
Storage location: J 106
Order number: 12 7 210
Control unit seal
Consisting of
1 = 12 7 211 Seal marks
2 = 12 7 212 Hole punch
Note. For seal mark dating
See also:
• 12 7 060 Antistatic mat (ESD)