28 00 Double Clutch Gearbox
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Torx screw, steel | GS7D36SG | M8x50 | 19 Nm | |
| GS7D36SG | M10 | 38 Nm | ||
| GS7D36SG | M12x50 | 66 Nm | ||
| Aluminium screws/bolts are not magnetic N54 | GS7D36SG | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GS7D36SG | M12 | Jointing torque | 25 Nm | |
| Torque angle | 130 ° | |||
| 2AZ Oil filler plug | GS7D36SG | Replace screw | 25±3 Nm | |
| 3AZ Oil drain plug | GS7D36SG | Replace screw | 8 Nm | |
| 4AZ Transmission oil sump | GS7D36SG | 10±1 Nm |
Transmission In General
28 10 Housing with add-on parts
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil-coolant heat exchanger to S65 transmission | GS7D36SG | M6 | 10 Nm | |
| 2AZ Holder, oil-coolant heat exchanger to S65 transmission | GS7D36SG | M6 | 8 Nm | |
| 3AZ Oil thermostat to transmission | GS7D36SG | M8x60 | 19 Nm | |
| 4AZ Hydraulic line to oil thermostat | GS7D36SG | M8 | 19 Nm | |
| 5AZ Transmission input speed sensor to transmission | GS7D36SG | M6 | 9 Nm | |
| 6AZ Instrument cluster sensor, oil pump, to transmission | GS7D36SG | M6 | 6 Nm | |
| 7AZ Oil pump spray plate to transmission | GS7D36SG | 10 Nm | ||
| 8AZ Oil pump to transmission | GS7D36SG | M6 | Position:1, 2, 5, 6, 7, 8 to final torque. | |
| Position: 1 loosen and to final torque. | 10 Nm | |||
| 9AZ Oil pump pressure pipe to transmission | GS7D36SG | M8 | Position: 3 and 4 to final torque | 25 Nm |
| 10AZ Clutch support to transmission | GS7D36SG | 10 Nm | ||
| 11AZ Aluminium screws/bolts, earth cable to transmission | GS7D36SG | Jointing torque | 5 Nm | |
| 12AZ Suction jet pump to transmission | GS7D36SG | M8 | 6 Nm | |
| 13AZ Suction filter to transmission | GS7D36SG | M6 | Screw (1) | 5 Nm |
| Screw (2) | 8 Nm | |||
| 14AZ Output flange | GS7D36SG | Collar nut installed with screw locking | ||
| Pretension | 175 Nm | |||
| Release | ||||
| Tighten Down | 125 Nm |
Housing with add-on parts
28 40 Double clutch gearbox (DKG)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Twin clutch on support/ retaining nut | GS7D36SG | 10-20 Nm |
Twin clutch
28 60 Control unit, mechatronics, hydraulics
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hydraulic cover to transmission | GS7D36SG | M6 | 10 Nm | |
| 2AZ Mechatronics to transmission | GS7D36SG | M5x30 | Jointing torque | 3 Nm |
| Torque angle | +50 ° | |||
| M5X35 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X50 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X75 | Jointing torque | 3 Nm | ||
| Torque angle | +90 ° |
Mechatronics control unit