Home/BMW/X5 M/BMW X5 M E70 рестайлинг (2010-2013)/Repair manual/Mechanical/Engine - Repair (M57): Component Locations

Contents

Section: Mechanical

Basic Measuring Techniques - Overview

Engine Technology - Overview

Engine and Gearbox Suspension - Tightening Torques (N52, N62)

Engine and Gearbox Suspension - Repair (N52)

Engine and Gearbox Suspension - Special Tools (N52, N62)

Engine and Gearbox Suspension - Repair (N62)

Engine and Gearbox Suspension - Tightening Torques (M57)

All sections

Engine - Repair (M57): Component Locations BMW X5 M E70 рестайлинг

Mechanical ~122 words

Observe following instructions relating to special tool

Prior to each use, check the special tools for defects, modifications and operational reliability.
Damaged/modified special tools must not be used!
No changes or modifications may be made to the special tools!
Keep special tools dry, clean and free of grease.

Necessary preliminary tasks

Secure engine bonnet/hood in service position. See «51 00... SERVICE POSITION OF ENGINE HOOD/BONNET»(ref-264848-S40400276242007091800000) .
Remove intake duct.
Remove intake filter housing. See «13 71 000 REMOVING AND INSTALLING/REPLACING THE INTAKE SILENCER HOUSING (M57T2 WITH AND WITHOUT SCR)»(ref-381163-S02545382362010122800000) .
Remove acoustic cover.
Remove «COMPARTMENT PARTITION WALL»(ref-264848-S31569615152007091800000) .

Assemble cross member 00 0 200 with special tools 00 0 202, 00 0 204, 00 0 208.