32 1 030 Lever
Minimum set: Mechanical tools
Note: For disconnecting hydraulic lines from steering gear and for locking adjustment unit (ASZE) at handbrake lever
Series: E60, E61, E63, E64, E65, E66, E67, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: B45, C45
SI number: 1 14 01 (766)
Order number: 32 1 030
Lever
Scheme 130
32 1 060 Drift
In conjunction with: 00 5 500
Note: For rotary shaft seal of inner segment shaft in steering gear
Series: E24, E28, E30, E31, E32, E34, E36, E38, E38/3, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, E87, E90, E91, E92, E93, RR2
Storage location: B30
Order number: 32 1 060
Drift
Scheme 131
32 1 260 Pliers
Note: For opening and fastening hose clamps
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, RR1, RR2
SI number: 1 02 01 (667)
Order number: 32 1 260
Pliers
Scheme 132
32 1 270 Plugs (set)
Minimum set: Mechanical tools
Note: 27-piece, 3x per size - For sealing off hydraulic lines for brakes, steering etc.
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1, RR2
SI number: 1 14 01 (766)
Order number: 32 1 270
Plugs (set)
Scheme 133
32 3 110 Releasing tool
Minimum set: Mechanical tools
Note: For unlocking lock cylinder in steering wheel lock during removal
Series: E31, E32, E34, E36, E36/7, E38, E39, E46, E60, E61, E63, E64, E83, E85, E86, R50, R52, R53
Storage location: A31
SI number: 1 06 94 (801)
Order number: 32 3 110
Releasing tool
Scheme 134
32 3 160 T-handled socket wrench WAF 38
Minimum set: Mechanical tools
Note: For setting camber on front axle
Series: E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E87, E90, E91, E92, E93
Storage location: A39
SI number: 1 15 99 (483)
Order number: 32 3 160
T-handled socket wrench WAF 38
Scheme 135
32 3 190 Setting tool
Minimum set: Mechanical tools
Note: For adjusting front camber.
Series: E60, E61, E63, E64
Storage location: B47
SI number: 1 08 03 (988)
Order number: 32 3 190
Setting tool
Scheme 136
32 4 000 Fixture
Note: For checking pump pressure in power steering system
Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93
Order number: 32 4 000
Fixture
Consisting of
1 = 32 4 001 Pressure gauge 16 bar
2 = 32 4 002 Pressure gauge 160 bar
3 = 32 4 003 Test fixture without pressure gauge
4 = 32 4 004 Line
5 = 32 4 005 Connecting piece
Note: For screwing into hydraulic pump / model series: E23, E46, E52, E53, E64, E65, E66, E85
6 = 32 4 006 Connecting piece
Note: For screwing into test fixture 32 4 003 / model series: E23, E46, E52, E53, E64, E65, E66, E85
7 = 32 4 007 Connecting piece M18x1.5
Note: For screwing into pressure regulator / model series: E32, E34
8 = 32 4 008 Connecting piece M14x1.5
Note: For screwing into test fixture / model series: E32, E34
9 = 32 4 009 Ball valve
11 = 32 4 011 Adapter M14 x 1.5
12 = 32 4 012 Adapter M16 x 1.5
Scheme 137
32 4 150 Gauge
Minimum set: Mechanical tools
Note: For securing steering spindle during wheel alignment on front axle
Series: E60, E61, E63, E64
Storage location: A49, B49
SI number: 1 30 03 (056)
Order number: 32 4 150
Gauge
Consisting of
1 = 32 4 151 Clamping frame
Note: Replaced by 32 4 154.
2 = 32 4 152 Clamping fork
Note: Replaced by 32 4 155.
3 = 32 4 153 Stand
4 = 32 4 154 Clamping frame
5 = 32 4 155 Clamping fork
