00 00 Excerpt From Company Standard BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| If there are no cross-references to tightening torques in the repair instructions, the EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 must be observed. | ||||
| There are different screws / nuts with surface color / (surface coating) - yellow (ZN) and silver (ZNS) The maximum tightening torques are: Surface color yellow (ZN): Applicable only to shank screws with metric coarse- and fine-pitch threads according to DIN 13-28 and nuts with nut height 0.8 x d according to DIN 934 and exclusively for a μ tot = 0.125 (screws phosphatized, nuts without subsequent treatment or galvanized. Lubrication condition: unlubricated and also oiled). | ||||
| Surface color silver (ZNS): Applicable only to shank screws with metric coarse- and fine-pitch threads according to DIN 13-28 and nuts with nut height 0.8 x d according to DIN 934 and exclusively for a spread of μ = 0.09 to 0.15 (screws cadmium-plated, nuts without subsequent treatment or galvanized. Lubrication condition: unlubricated and also oiled). The values specified in this table apply to all screw connections conforming to the aforementioned conditions. Not applicable when using a different surface or lubricant condition on the thread, or if the height of the nut differs. | ||||
| Not applicable to necked-down bolts, self-tapping screw connections or to connections between parts made of different materials. Attention! To be able to carry out competent repairs, it is essential to comply with the specified tightening torques. This presupposes that the required torque wrenches are subjected to regular testing. Permitted tolerance of torque wrenches ± 2% of scale value. Approved torque wrenches and torque testers are contained in the catalog Workshop Equipment Planning documentation. |
TIGHTENING TORQUE SPECIFICATION - EXCERPT FROM COMPANY STANDARD BMW GS 90003-2
00 00 M10 and M10 x 1 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M10 thread | Yellow (ZN) | M10 8.8 | 47 Nm | |
| Silver (ZNS) | M10 8.8 | 38 Nm | ||
| Yellow (ZN) | M10 10.9 | 66 Nm | ||
| Silver (ZNS) | M10 10.9 | 56 Nm | ||
| Yellow (ZN) | M10 12.9 | 79 Nm | ||
| Silver (ZNS) | M10 12.9 | 62 Nm | ||
| M10x1 thread | Yellow (ZN) | M10 x 1 8.8 | 54 Nm | |
| Silver (ZNS) | M10 x 1 8.8 | 41 Nm | ||
| Yellow (ZN) | M10 x 1 10.9 | 75 Nm | ||
| Silver (ZNS) | M10 x 1 10.9 | 60 Nm | ||
| Yellow (ZN) | M10 x 1 12.9 | 91 Nm | ||
| Silver (ZNS) | M10 x 1 12.9 | 67 Nm |
TIGHTENING TORQUE SPECIFICATION - M10 AND M10 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M12 and M12x1.5 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M12 thread | Yellow (ZN) | M12 8.8 | 82 Nm | |
| Silver (ZNS) | M12 8.8 | 66 Nm | ||
| Yellow (ZN) | M12 10.9 | 115 Nm | ||
| Silver (ZNS) | M12 10.9 | 98 Nm | ||
| Yellow (ZN) | M12 12.9 | 140 Nm | ||
| Silver (ZNS) | M12 12.9 | 108 Nm | ||
| M12x1.5 thread | Yellow (ZN) | M12 x 1.5 8.8 | 87 Nm | |
| Silver (ZNS) | M12 x 1.5 8.8 | 68 Nm | ||
| Yellow (ZN) | M12 x 1.5 10.9 | 123 Nm | ||
| Silver (ZNS) | M12 x 1.5 10.9 | 100 Nm | ||
| Yellow (ZN) | M12 x 1.5 12.9 | 147 Nm | ||
| Silver (ZNS) | M12 x 1.5 12.9 | 110 Nm |
TIGHTENING TORQUE SPECIFICATION - M12 AND M12X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M14 and M14x1.5 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M14 thread | Yellow (ZN) | M14 8.8 | 130 Nm | |
| Silver (ZNS) | M14 8.8 | 104 Nm | ||
| Yellow (ZN) | M14 10.9 | 180 Nm | ||
| Silver (ZNS) | M14 10.9 | 155 Nm | ||
| Yellow (ZN) | M14 12.9 | 220 Nm | ||
| Silver (ZNS) | M14 12.9 | 170 Nm | ||
| M14x1.5 thread | Yellow (ZN) | M14 x 1.5 8.8 | 143 Nm | |
| Silver (ZNS) | M14 x 1.5 8.8 | 110 Nm | ||
| Yellow (ZN) | M14 x 1.5 10.9 | 200 Nm | ||
| Silver (ZNS) | M14 x 1.5 10.9 | 165 Nm | ||
| Yellow (ZN) | M14 x 1.5 12.9 | 240 Nm | ||
| Silver (ZNS) | M14 x 1.5 12.9 | 180 Nm |
TIGHTENING TORQUE SPECIFICATION - M14 AND M14X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M16 and M16x1.5 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M16 thread | Yellow (ZN) | M16 8.8 | 200 Nm | |
| Silver (ZNS) | M16 8.8 | 160 Nm | ||
| Yellow (ZN) | M16 10.9 | 280 Nm | ||
| Silver (ZNS) | M16 10.9 | 235 Nm | ||
| Yellow (ZN) | M16 12.9 | 340 Nm | ||
| Silver (ZNS) | M16 12.9 | 260 Nm | ||
| M16x1.5 thread | Yellow (ZN) | M16 x 1.5 8.8 | 216 Nm | |
| Silver (ZNS) | M16 x 1.5 8.8 | 170 Nm | ||
| Yellow (ZN) | M16 x 1.5 10.9 | 303 Nm | ||
| Silver (ZNS) | M16 x 1.5 10.9 | 250 Nm | ||
| Yellow (ZN) | M16 x 1.5 12.9 | 364 Nm | ||
| Silver (ZNS) | M16 x 1.5 12.9 | 275 Nm |
TIGHTENING TORQUE SPECIFICATION - M16 AND M16X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M18 and M18x1.5 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M18 thread | Yellow (ZN) | M18 8.8 | 280 Nm | |
| Silver (ZNS) | M18 8.8 | 225 Nm | ||
| Yellow (ZN) | M18 10.9 | 390 Nm | ||
| Silver (ZNS) | M18 10.9 | 330 Nm | ||
| Yellow (ZN) | M18 12.9 | 470 Nm | ||
| Silver (ZNS) | M18 12.9 | 365 Nm | ||
| M18x1.5 thread | Yellow (ZN) | M18 x 1.5 8.8 | 313 Nm | |
| Silver (ZNS) | M18 x 1.5 8.8 | 245 Nm | ||
| Yellow (ZN) | M18 x 1.5 10.9 | 440 Nm | ||
| Silver (ZNS) | M18 x 1.5 10.9 | 360 Nm | ||
| Yellow (ZN) | M18 x 1.5 12.9 | 527 Nm | ||
| Silver (ZNS) | M18 x 1.5 12.9 | 400 Nm |
TIGHTENING TORQUE SPECIFICATION - M18 AND M18X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M4 and M5 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M4 thread | Yellow (ZN) | M4 8.8 | 3 Nm | |
| Silver (ZNS) | M4 8.8 | 2 Nm | ||
| Yellow (ZN) | M4 10.9 | 4 Nm | ||
| Silver (ZNS) | M4 10.9 | 3 Nm | ||
| Yellow (ZN) | M4 12.9 | 5 Nm | ||
| M5 thread | Yellow (ZN) | M5 8.8 | 6 Nm | |
| Silver (ZNS) | M5 8.8 | 5 Nm | ||
| Yellow (ZN) | M5 10.9 | 8 Nm | ||
| Silver (ZNS) | M5 10.9 | 7 Nm | ||
| Yellow (ZN) | M5 12.9 | 10 Nm | ||
| Silver (ZNS) | M5 12.9 | 8 Nm |
TIGHTENING TORQUE SPECIFICATION - M4 AND M5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M6 and M7 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M6 thread | Yellow (ZN) | M6 8.8 | 10 Nm | |
| Silver (ZNS) | M6 8.8 | 8 Nm | ||
| Yellow (ZN) | M6 10.9 | 14 Nm | ||
| Silver (ZNS) | M6 10.9 | 12 Nm | ||
| Yellow (ZN) | M6 12.9 | 17 Nm | ||
| Silver (ZNS) | M6 12.9 | 13 Nm | ||
| M7 thread | Yellow (ZN) | M7 8.8 | 15 Nm | |
| Silver (ZNS) | M7 8.8 | 13 Nm | ||
| Yellow (ZN) | M7 10.9 | 21 Nm | ||
| Silver (ZNS) | M7 10.9 | 19 Nm | ||
| Yellow (ZN) | M7 12.9 | 26 Nm | ||
| Silver (ZNS) | M7 12.9 | 21 Nm |
TIGHTENING TORQUE SPECIFICATION - M6 AND M7 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
00 00 M8 and M8 x 1 - Maximum Tightening Torques Acc. To BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface color / (surface coating) | |||
| M8 thread | Yellow (ZN) | M8 8.8 | 24 Nm | |
| Silver (ZNS) | M8 8.8 | 19 Nm | ||
| Yellow (ZN) | M8 10.9 | 34 Nm | ||
| Silver (ZNS) | M8 10.9 | 28 Nm | ||
| Yellow (ZN) | M8 12.9 | 40 Nm | ||
| Silver (ZNS) | M8 12.9 | 32 Nm | ||
| M8x1 thread | Yellow (ZN) | M8 x 1 8.8 | 26 Nm | |
| Silver (ZNS) | M8 x 1 8.8 | 21 Nm | ||
| Yellow (ZN) | M8 x 1 10.9 | 36 Nm | ||
| Silver (ZNS) | M8 x 1 10.9 | 30 Nm | ||
| Yellow (ZN) | M8 x 1 12.9 | 44 Nm | ||
| Silver (ZNS) | M8 x 1 12.9 | 33 Nm |
TIGHTENING TORQUE SPECIFICATION - M8 AND M8 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
See also:
• EXCERPT FROM COMPANY STANDARD BMW GS 90003-2