34 00 Testing and bleeding brakes E60 / E61
| Leak test with engine stopped: if applicable discharge vacuum reservoir by operating brake pedal firmly about 10 times | ||
|---|---|---|
| Approx. force on pedal | Approx. N | 500 |
| Equals approx. line pressure | Approx. bar | 33 |
| Max. pressure drop within 2 min. | Percent | 8 |
| Brake booster function test (with engine running) | 75... 90 | |
| Approx. force on pedal | Approx. N | 200 |
TECHNICAL DATA - TESTING & BLEEDING BRAKES
34 11 Front Brake E60
| Different thicknesses on brake linings | Max. mm | 0.01 |
|---|---|---|
| Surface roughness of braking surfaces (precision-turned) | Ra μ | |
| Brake disc diameter Models: 520d 520i 523i 525i M54 525d | Mm | 310 |
| Brake disc diameter Models: 525i N52 530i M54 530d 630i 525ix 530ix | Mm | 324 |
| Brake disc diameter Models: 530i N52 545i 535d 645Ci 540i 550i | Mm | 348 |
| Wear warning from residual lining thickness | Mm | 3.0 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:520d 520i 525i 525d | Mm | 22.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models: 530i 530d 525ix 530ix | Mm | 28.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:545i 645Ci 630i 540i | Mm | 28.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:535d 550i | Mm | 34.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | Mm | 0.8 |
TECHNICAL DATA - FRONT BRAKE E60
34 11 Front Brake E60 / M5
| Wear warning from residual lining thickness | Mm | 3.7 |
|---|---|---|
| Brake disk minimum thickness (MIN TH) is stamped in brake disc shell Models: M5 | Mm | 34.4 |
| Different thicknesses on brake linings | Mm | .01 |
| Brake disc diameter Models: M5 | Mm | 374 |
TECHNICAL DATA - FRONT BRAKE E60 / M5
34 21 Rear Brake Discs E60
| Different thicknesses on brake linings | Max. mm | 0.01 |
|---|---|---|
| Surface roughness of braking surfaces (precision-turned) | Ra μ | |
| Brake disc diameter Models:520d 520i 523i 525i 525d 530i 530d 630i 525ix 530ix | Mm | 320 |
| Brake disc diameter Models: 545i 645Ci 535d 540i 550i | Mm | 345 |
| Wear warning from residual lining thickness | Mm | 3.7 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:520d 520i 525i 525d 530i 530d 630i 525ix 530ix | Mm | 18.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models: 545i 645Ci 535d 540i 550i | Mm | 22.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | Mm | 0.8 |
TECHNICAL DATA - REAR BRAKE DISCS E60
34 21 Rear Brake Discs E60 / M5
| Wear warning from residual lining thickness | Mm | 3.7 |
|---|---|---|
| Brake disk minimum thickness (MIN TH) is stamped in brake disc shell Models: M5 | Mm | 22.4 |
| Different thicknesses on brake linings | Max. mm | 0.01 |
| Brake disc diameter Models: M5 | Mm | 370 |
TECHNICAL DATA - REAR BRAKE DISCS E60 / M5
34 41 Parking Brake E60
| Handbrake drum diameter | Mm | 185 |
|---|---|---|
| Surface roughness of braking surfaces (precision-turned) | 0.5... 3.5 | |
| Minimum lining thickness | Mm | 1.5 |
TECHNICAL DATA - PARKING BRAKE E60