62 11 280 Removing and installing (replacing) instrument cluster
| IMPORTANT | Read and comply with notes on protection against electrostatic damage (ESD protection) . |
| IMPORTANT | Risk of damage! Carry out this operation carefully so as to avoid damaging the instrument panel. |
Extend steering wheel completely and lower.
Release screws (1). Tightening torque 1.5 Nm .
Pull instrument cluster (2) forward slightly in direction of arrow.
Disconnect associated plug connection.
If necessary, feed out/unclip associated wiring harness.
Remove instrument cluster (2).
Scheme 50
Replacement
Carry out vehicle programming/coding .
Check values for Condition Based Service (CBS) and correct if necessary.