64 52 A/C compressor
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | 20 Nm | |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | 30±1 Nm | ||
| 3AZ A/C compressor to carrier | M67TU, M54, N62, S85, N54 | M8 | 21 Nm | |
| N45, N46, M47T2, M57TU, M57T2 | M8 | 19 Nm | ||
| N52K | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle | 10 Nm 180±15° | |
| N52K | M8 x 52 | Replace aluminium screw/bolt Jointing torque Torque angle | 10 Nm 90±15° | |
| N52 | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle | 10 Nm 180±15° | |
| N53 | M8 x 52 | Replace aluminium screw/bolt Jointing torque Torque angle | 10 Nm 90±15° | |
| N53 | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle | 10 Nm 180±15° | |
| E85 S54, E86 S54 | 20 Nm | |||
| 4AZ Belt pulley/hub to A/C compressor | M47T2 | 35±5 Nm | ||
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | 19 Nm | ||
| 6AZ Cable holder to A/C compressor | M47T2 | 3 Nm |
TIGHTENING TORQUE SPECIFICATION - A/C COMPRESSOR
64 52 Air conditioning compressor
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to air-conditioning compressor | E70, E71, E72 | M8 | 21 Nm | |
| E60/N47, E61/N47, E81, E82, E87, E88, E90/N47, E91/N47, E92/N47, E84/N47 | M8 | 18.5 Nm | ||
| E92/S65 | M8 | 21 Nm | ||
| 2AZ Oil filler plug, air conditioning compressor | E70, E71, E72 | 30 ± 1 Nm | ||
| E81/N43, E82, E88 | 25 Nm | |||
| 3AZ A/C compressor to carrier | N52, N52K | M8 x 87 | Replace aluminium screw/bolt Replace! Jointing torque Angle of rotation | 10 Nm 180±15° |
| M8 x 52 | Replace aluminium screw/bolt Replace! Jointing torque Angle of rotation | 10 Nm 90±15° | ||
| N43 | M8 | 23 Nm | ||
| N47 | M8 | 19 Nm | ||
| N54 | M8 | 19 Nm | ||
| N55 | M8 | 19 Nm | ||
| M57 | M8 | 19 Nm | ||
| N62 | M8 | 21.4 ± 3.2 Nm | ||
| N63 | M8 | 21.4 ± 3.2 Nm | ||
| S63 | M8 | 21.4 ± 3.2 Nm | ||
| 4AZ Bracket, pressure line, to compressor | E82/N54 | 7.6 Nm | ||
| 5AZ Bearing support, compressor, to crankcase | E70/E71 | 19 Nm | ||
| 6AZ Electric A/C compressor, to crankcase | E72 | M8 | 21.4 ± 3.2 Nm |
TIGHTENING TORQUE SPECIFICATION - AIR CONDITIONING COMPRESSOR
64 52 Compressor
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to compressor | E90, E91, E92 | M8 | 18.5 Nm | |
| 2AZ Filler plug, compressor | E90, E91, E92 | 30±1 Nm | ||
| 3AZ Compressor to bracket | E90, E91, E92 | M8 | 19 Nm |
TIGHTENING TORQUE SPECIFICATION - COMPRESSOR
64 11 Housing, heater/air conditioner
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bulkhead adapter | E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 2AZ Blower for heater/air conditioner | E85, E86 | 1.5 ± 0.3 Nm | ||
| 3AZ Controller for heating and air conditioning system blower | E84, E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 4AZ Air conditioner to bulkhead | E60, E61, E63, E64, E83, E81, E82, E87, E88, E90, E91, E92, E93 | 6 Nm | ||
| E70, E71, E72 | 6.5 Nm | |||
| 5AZ Cooler box to luggage compartment partition wall | E65, E66, E67 | 4.5 Nm | ||
| 6AZ Air conditioner to support tube | E81, E82, E84, E87, E88, E90, E91, E92, E93 | 9 Nm | ||
| 7AZ Mounting, positive/negative lead, to electric auxiliary heater | E83 | 8.8 Nm |
TIGHTENING TORQUE SPECIFICATION - HOUSING, HEATER/AIR CONDITIONER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bulkhead adapter | E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 2AZ Fan for heater/air conditioner | E85, E86 | 1.5 ± 0.3 Nm | ||
| 3AZ Controller for heater - A/C system fan | E84, E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 4AZ Air conditioner to bulkhead | E60, E61, E63, E64, E83, E81, E82, E87, E88, E90, E91, E92, E93 | 6 Nm | ||
| E70, E71, E72 | 6.5 Nm | |||
| 5AZ Cooler box to luggage compartment partition wall | E65, E66, E67 | 4.5 Nm | ||
| 6AZ Air conditioner to support tube | E81, E82, E84, E87, E88, E90, E91, E92, E93 | 9 Nm | ||
| 7AZ Mounting, positive/negative lead, to electric auxiliary heater | E83 | 8.8 Nm |
TIGHTENING TORQUE SPECIFICATION - HOUSING, HEATER/AIR CONDITIONER
64 12 Independent heater
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Muffler to independent heater bracket | E90, E91, E92, E93 | M6 | 8.0 Nm | |
| 2AZ Mounting, independent heater, to engine carrier | E90, E91, E92, E93 | M6 | 7.6 Nm | |
| 3AZ Mounting, independent heater, to locator, cooling module | E90, E91, E92, E93 | 19.5 Nm | ||
| 4AZ Rubber mount to independent heater | E90, E91, E92, E93 | 8.0 Nm |
TIGHTENING TORQUE SPECIFICATION - INDEPENDENT HEATER
64 53 Refrigerant Lines and Expansion Valve
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to dryer flask | E83, E85, E86 | M8 | 20 Nm | |
| 2AZ Refrigerant lines to expansion valve/double pipe | E46, E83, E85, E86, E81, E82, E87, E88, E89, E90, E91, E92, E93 | M8 | 20 Nm | |
| E53 | M8 | 18 Nm | ||
| E84 | M8 | 18.5 NM | ||
| 3AZ Adapter plate to expansion valve | E85, E86, E89 | M6 | 10 ± 2 Nm | |
| 4AZ Expansion valve to heater - A/C | E85, E86, E89 | M5 | 5.5 Nm | |
| 5AZ Refrigerant line to heater end panel | E85, E86 | M6 | 8.6 Nm | |
| 6AZ Refrigerant lines to capacitor | E60, E61, E63, E64, E81, E82, E83, E85, E86, E87, E88, E89, E90, E91, E92, E93 | M8 | 20 Nm | |
| E84 | M8 | 18.5 Nm | ||
| 7AZ Refrigerant lines to expansion valve | E60, E61, E63, E64 | M6 | 8.8 Nm | |
| 8AZ Refrigerant line to assembly compartment partition reinforcement | E60, E61, E63, E64 | M6 | 7.6 Nm | |
| 9AZ Expansion valve to heater - A/C | E46, E60, E61, E63, E64, E83 | M5 | 5.5 Nm | |
| 10AZ Refrigerant line to body | E46, E83 | M6 | 5.5 Nm | |
| 11AZ Double pipe to expansion valve | E46, E83 | M6 | 8.0 Nm | |
| 12AZ Screw plug to capacitor | E53, E81, E82/E84, E87, E88, E90, E91, E92 | 3.0 ± 0.5 Nm | ||
| 13AZ Expansion valve to retaining clip | E81, E82, E84, E87, E88, E90, E91, E92, E93 | M6 | 5.5 Nm | |
| 14AZ Pressure sensor in refrigerant line | E53, E60, E61, E63, E64, E65, E66, E81, E82, E83, E84, E85, E86, E87, E88, E89, E90, E91, E92, E93 | 10 Nm | ||
| 15AZ Refrigerant line to adapter lead | E60/N53, E61/N53, E63/N53, E64/N53, E60/N54, E61/N54 | 18 Nm |
TIGHTENING TORQUE SPECIFICATION - REFRIGERANT LINES AND EXPANSION VALVE