11 23 Vibration Damper
| Application | Type | Thread | Tightening Instructions | Measure |
|---|---|---|---|---|
| 1AZ V-belt pulley on crankshaft | M10 | Replace nut | 190 N.m | |
| 2AZ Vibration damper/hub to crankshaft | M20/M21/M50/M52/M52TU/S50 US/S52/M54/M56 | M18x1.5 | Replace screws | 410 N.m |
| M30/S14/ S38/B35 | M24 x 1.5 | Replace nut | 440 N.m | |
| M41/M47/M47TU/M51/M60/M62 | M 18x1.5 | Replace screw | ||
| Jointing torque | 100 N.m | |||
| Torque angle | 60° | |||
| Torque angle | 60° | |||
| Torque angle | 30° | |||
| N62/N73 | M 18x1.5 | Replace screw | ||
| Jointing torque | 100 N.m | |||
| Torque angle | 60° | |||
| Torque angle | 60° | |||
| Torque angle | 60° | |||
| M70/S70/M73 | M 18x1.5 | Replace screw | ||
| Jointing torque | 100 N.m | |||
| Torque angle | 60° | |||
| Torque angle | 60° | |||
| M57/M57TU/M67/M67TU | M10 | Replace screws | ||
| Jointing torque | 40 N.m | |||
| Torque angle | 60° | |||
| Torque angle | 60° |
VIBRATION DAMPER SPECIFICATION
| Application | Type | Thread | Tightening Instructions | Measure |
|---|---|---|---|---|
| 3AZ Belt pulley/vibration damper to hub | S38/B36 | M8 10.9 | 34 N.m | |
| N40/N42/N45/N46/S38/B38 | M8 10.9 | 34 N.m | ||
| All/others | M8 | 22 N.m | ||
| 4AZ Belt pulley to vibration damper | S38/B35 | M8 8.8 | 22 N.m | |
| S50 | M8 8.8 | 22 N.m | ||
| 5AZ Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 N.m |
| M42/M43/M43TU/M44 | M16 x 1.5 | Replace screw | 330 N.m | |
| 6AZ Hub to crankshaft | N40/N42/N45/N46 | M16 x 1.5 | Replace screw | 300 N.m |
VIBRATION DAMPER SPECIFICATION