Ignition Coils, Removing and Installing Audi TT 8N

Special tools and equipment required

Scheme 68

1. Puller T10095 A

Scheme 69

1. Assembly tool T10118

Removing

1. Disconnect electrical connectors at ignition coils by releasing tab (arrow) with assembly tool T10118 and pulling connector.

1. Attach puller T10095 A to ignition coils as shown in illustration (arrow) and remove ignition coils one at a time.

Installing

Install in reverse order of removal. Note the following

Scheme 70

1. Insert ignition coils into holes so that flat edges align with one another (arrows).