FASTENER TIGHTENING SPECIFICATIONS
| Components | Fastener Size | Nm |
|---|---|---|
| Bracket for High-Pressure Lines | 9 | |
| Camshaft Position (CMP) Sensor | 9 | |
| E-box Cover | 3.5 | |
| Engine Speed (RPM) Sensor | 9 | |
| Fuel Pressure Sensor 2 | 22 | |
| Fuel Rail Threaded Connection | 40 | |
| High Pressure Fuel Line | 27 | |
| High-Pressure Lines | 9 | |
| High Pressure Pump 3 | 20 | |
| Intake Manifold Runner Position Sensor | 2.5 | |
| Low Fuel Pressure Sensor | 15 | |
| Oxygen Sensor | 55 | |
| Protective Plate for High Pressure Line, Nut | 9 | |
| Double Bolt | 9 | |
| Retaining Bracket for Fuel Rail 1 | ||
| 2.5 | ||
| 9 | ||
| Threaded Support for High Pressure Pump | 27 | |
| Throttle Valve Control Module | 10 | |
| 1 For bolt tightening clarification, refer to LOWER INTAKE MANIFOLD SECTION OVERVIEW and see items -10, 11 and 12- 2 Oil the threads 3 Tighten by hand in a diagonal sequence and then tighten to 5 Nm | ||
TIGHTENING SPECIFICATION, INTAKE MANIFOLD LOWER SECTION
Tighten the bolts and nuts -arrows- in a diagonal sequence on the intake manifold lower section and in steps.
- 10 Nm