FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|---|---|
| Coolant Connecting Piece | 9 | |
| Coolant Pump | 9 | |
| Drain Plug for Map Controlled Engine Cooling Thermostat | 4 | |
| Drain Plug for Front Coolant Pipe | 10 | |
| Fan Rib | 5 | |
| Front Coolant Pipe | 9 | |
| Lower Left Coolant Pipe | 9 | |
| Map Controlled Engine Cooling Thermostat | 9 | |
| Radiator Bracket | 3.5 | |
| Rear Coolant Pipe | 9 | |
| Right Coolant Pipe | 9 | |
| Upper Left Coolant Pipe, Nut/Bolt | 9 |
AFTER-RUN COOLANT PUMP -V51-, TIGHTENING SPECIFICATIONS
Tighten the nut -1- for the after-run coolant pump to 5 Nm.
Note. Ignore -2- and -arrows-.
See also:
• Removal and Installation