FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|---|---|
| After-Run coolant pump to engine | 4 | |
| Bracket for after-run coolant pump to engine | 9 | |
| Bracket for front left coolant pipes | 22 | |
| Bracket for left charge air cooling circuit radiator, nut | 9 | |
| Bracket for charge air coolant pump, nut | 9 | |
| Connecting piece for coolant hose | 9 | |
| Coolant thermostat | 9 | |
| Coolant pump | 9 | |
| Fan shroud, version 1 | 4.5 | |
| Fan shroud, version 2 | 3.5 | |
| Front charge air cooling circuit radiator | 4.5 | |
| Front coolant pipe | 9 | |
| Idler roller for ribbed belt | 42 | |
| Left front coolant pipes | 9 | |
| Lower coolant pipe on the supercharger | 5 | |
| Radiator bracket 1 | ||
| 4.5 | ||
| 5 | ||
| Ribbed belt pulley for coolant pump | 20 | |
| Upper coolant pipe | 9 | |
| Upper coolant pipe on the supercharger | 5 | |
| 1 For bolt tightening clarification, refer to RADIATOR AND COOLANT FAN OVERVIEW and see items -22 and 23 | ||
CHARGE AIR COOLING PUMP -V188-, TIGHTENING SPECIFICATIONS
Tighten the nut -2- to 9 Nm.
See also:
• Removal and Installation